Milwaukee 4555-22 manual Machine USE and Care

Page 3

GENERAL SAFETY RULES

MACHINE USE AND CARE

Gasoline operated machines are powerful and can cause serious injury if not used in accordance with the manufacturer’s instructions. To reduce the risk of injury:

14.BE THOROUGHLY FAMILIAR WITH CONTROLS. Know how to stop the machine and relieve system pressure quickly.

15.KEEP THE AREA OF OPERATION CLEAR OF ALL PERSONS. Small children and pets should be kept a safe distance from work area.

16.AVOID DANGEROUS ENVIRONMENTS. NEVER USE IN AN EXPLOSIVE ATMOSPHERE. Normal sparking of the motor could ignite fumes. Keep work area well lit.

17.USE ONLY RECOMMENDED ACCESSORIES. The use of improper accessories may cause risk of injury.

18.CHECK FOR DAMAGED PARTS. Before using the machine, a guard, or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of mov- ing parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged must be properly repaired or replaced by an authorized service center to avoid risk of personal injury.

19.NEVER STORE THE MACHINE INDOORS WITH FUEL IN THE FUEL TANK. If the fuel tank has to be drained, do this outdoors. Empty fuel tank and restrain the unit from moving before transporting in a vehicle.

GASOLINE ENGINE SAFETY

Gasoline engines produce sparks and heat that are capable of igniting combustible vapors or materials and causing burn injuries, fire, or explosion. To reduce the risk of injury, observe the following:

20.KEEP THE ENGINE AWAY FROM FLAMMABLES AND OTHER COMBUSTIBLE MATERIALS. Keep the engine free of grass, leaves, or grease to reduce the chance of a fire hazard. Do not operate around dry brush, twigs, cloth rags, or other flammable materials. Make sure minimum clearance of 3 feet is maintained from combustible materials.

21.NEVER ATTEMPT TO MAKE ANY ADJUSTMENTS WHILE THE ENGINE IS RUNNING (except where specifically recommended by the manufacturer). Never pick up or carry a machine while the engine is running.

22.KEEP THE AIR INTAKE AND EXHAUST MUFFLER FREE OF OBSTRUCTIONS AND FOREIGN OBJECTS. Keep all sides of the machine at least 3 feet away from buildings and obstructions.

23.ALWAYS OPERATE THE MACHINE on a level surface. If the engine is at an incline, it could seize due to improper lubrication (even at the maximum oil level).

24.DO NOT TOUCH THE SPARK PLUG AND IGNITION CABLE when starting and operating the engine.

25.CHECK FUEL HOSES AND JOINTS for looseness and fuel leakage before each use.

MAINTENANCE/SERVICE

26.KEEP MACHINE DRY, CLEAN, AND FREE FROM OIL AND GREASE. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum- based products, or any solvents to clean machine.

27.BEFORE CLEANING, REPAIRING, OR INSPECTING, shut off the engine, make certain all moving parts have stopped and relieve system pressure. Disconnect the spark plug wire, and keep the wire away from the plug to prevent accidental starting.

28.CHECK BOLTS AND NUTS for looseness before each use. A loose bolt or nut may cause serious problems.

29.WHEN SERVICING USE ONLY IDENTICAL MILWAU- KEE REPLACEMENT PARTS. Use of any other parts may create a hazard or cause product damage.

30.MAINTAIN LABELS AND NAMEPLATES. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.

31.SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to instruct other users. If you loan someone this machine, loan them these instructions also.

page 3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents OPERATOR’S Manual Read ALL Instructions General Safety RulesMachine USE and Care Specific Safety Rules Pressure Washers Symbology Symbol Signal MeaningSymbol Name DESIGNATION/EXPLANATION Product Specifications Functional DescriptionSize Output Features Packing List AssemblyAttaching the Wheel Assembly UnpackingTo install the pressure/flow adjustment handle cap Installing the Frame SupportsInstalling the Wand Storage Holster To install the pump oil capConnecting the High Pressure Hose to the Spray Wand Assembling the Spray WandAttaching Injection Hose Adding Gasoline to the Fuel Tank Adding OIL to the EngineConnecting the High Pressure Hose to the Pump Connecting the Garden Hose to the Pressure WasherOperation ApplicationsGeneral Instruction Starting and Stopping the Pressure Washer To startTo stop To engage the lock off Using the Spray Wand TriggerSelecting the Correct QUICK-CONNECT Nozzle for the JOB Moving the Pressure WasherTo connect a nozzle to the spray wand Using the Pressure Washer Washing with DetergentBefore shutting off the engine Maintenance General MaintenanceNozzle Maintenance See Figures 21 Pump MaintenanceStoring the Pressure Washer Preparing for USE After StoragePeriodic Maintenance Schedule Table AccessoriesProblem Cause Solution TroubleshootingTroubleshooting Evaporative Emission Control Warranty Statement WarrantyEmission Warranty Parts List Pressure Washer Lire Toutes LES Instructions Règles DE Sécurité GénéralesSoin ET Utilisation DE LA Machine Règles DE Sécurité Spécifiques Nettoyeur Haute Pression Symbole NOM DÉSIGNATION/EXPLICATION SymbolesDescription Fonctionnelle Fiche TechniqueCaractéristiques Liste DE Contrôle AssemblageAvertissement DéballageInstallation DES Supports DE Cadre Installation DE L’ÉTUI DE Remisage DE LA LancePour installer le bouchon d’huile de la pompe Assemblage DE LA Lance DE Pulvérisation Ajout D’ESSENCE Dans LE Réservoir DE Carburant Ajout D’HUILE MoteurLA Pompe Connexion DU Tuyau Haute Pression ÀInstructions Générales UtilisationPour arrêter Démarrage ET Arrêt DU Nettoyeur Haute PressionVoir les Figures 12 et Pour démarrerVoir les Figure Utilisation DE LA Détente DE LA Lance DE PulvérisationDéplacement DU Nettoyeur Haute Pression Lavage Avec Détergent Utilisation DU Nettoyeur Haute PressionEntretien Entretien GénéralEntretien DE LA Buse Voir les Figures 21 et Mise EN Service Après RemisageRemisage DU Nettoyeur Haute Pression Entretien DE LA PompeAccessoires Tableau D’ENTRETIEN PériodiqueTableau DE Calendrier D’ENTRETIEN Périodique Dépannage Problème Cause SolutionDépannage VOS Droits ET Obligations Dans LE Cadre DE LA Garantie GarantieExigences Concernant LES Réparations Sous Garantie Nettoyeur haute pression Peligro Reglas DE Seguridad GeneralesEmpleo Y Cuidado DE LA Máquina Reglas DE Seguridad Específicas Lavadoras a Presión Símbolo Nombre DENOMINACIÓN/EXPLICACIÓN SimbologíaSímbolo Señal Significado Peligro PrecauciónDescripción Funcional Especificaciones DEL ProductoCaracterísticas Lista DE Empaquetado ArmadoAdvertencia DesempaquetadoPara instalar la tapa del mango de ajuste de flujo/ presión Instalación DE LA Funda DE ALMACE- Namiento DEL RociadorVea la figura Para instalar la tapa del aceite de la bombaArmado DEL Rociador Conexión DE LA Manguera DE Alta Presión AL RociadorConexión DE LA Manguera DE Inyección Para Añadir Gasolina AL Tanque DE Combustible Para Añadir Aceite AL MotorQuina Conexión DE LA Manguera DE Jardín a LA Lavadora a PresiónConexión DE LA Manguera DE Alta Presión a LA Bomba Para conectar la manguera de jardín a-la máFuncionamiento UsosInstrucción General Para apagar Encendido Y Apagado DE LA Lavadora a PresiónVea las figuras 12 a Para arrancarVea las figura Utilización DEL Gatillo DEL RociadorPara conectar una boquilla al rociador Traslado DE LA Lavadora a PresiónUtilización DE LA Lavadora a Presión Lavando CON DetergenteAntes de apagar el motor Mantenimiento Mantenimiento GeneralMantenimiento DE LA Boquilla Almacenamiento DE LA Lavadora a Presión Mantenimiento DE LA BombaVea las figuras 21 Tabla DE Calendario DE Mantenimiento Periódico AccesoriosProblema Causa Solución Solución DE ProblemasBloqueos Derechos Y Obligaciones DEL Consumidor Según LA Garantía GarantíaLista DE Piezas DE Garantía DE Emisión Lavadora a presión Notas Notas Sawdust United States

4555-22 specifications

The Milwaukee 4555-22 is a powerful and innovative tool in the landscape of heavy-duty construction and renovation. Designed primarily as a wall cutter, this equipment is built to facilitate quick, precise cuts in a variety of materials, including brick, block, and concrete. One of its most appealing attributes is its formidable 15-amp motor that effortlessly generates a no-load speed of up to 4,100 RPM. This powerful motor not only enhances cutting efficiency but also extends the life of the tool through its robust design.

One of the standout features of the Milwaukee 4555-22 is its innovative adjustable depth control. This allows users to make cuts into materials with depths between 0-3 inches, making it a versatile tool suitable for diverse applications. Furthermore, the tool comes equipped with a lead screw that facilitates consistent depth settings, ensuring that users can achieve the exact depth required for their specific tasks without any guesswork.

The Milwaukee 4555-22 also boasts an ergonomic design, featuring an adjustable rear handle that provides a comfortable grip during operation. This feature is particularly invaluable for prolonged use, as it minimizes user fatigue and enhances overall control. Additionally, the integrated water feed system aids in dust management while cutting, thereby promoting a cleaner working environment and increasing visibility.

The characteristic durability of Milwaukee tools is present in the 4555-22 model. Its reinforced housing and components are engineered to withstand the rigors of heavy use on job sites, ensuring longevity and reliability. Moreover, the tool is designed for easy blade changes, allowing users to switch between blades tailored for different materials efficiently.

Another key technology featured in the Milwaukee 4555-22 is its integrated overload protection system. This feature prevents the motor from overheating during demanding tasks, thus safeguarding the tool and prolonging its operational lifespan.

In conclusion, the Milwaukee 4555-22 combines power, precision, and user-friendly design, making it an essential tool for professionals in construction and renovation. Its advanced features, from adjustable depth controls to integrated overload protection, underscore Milwaukee's commitment to innovation and quality, ensuring that users can tackle their toughest cutting tasks with confidence and ease.
Top Page Image Contents