Toshiba VF-S11 manual How to set the frequency, Hoqf=, Example of operating a run from the panel

Page 22

E6581160

3.1.2How to set the frequency

[Example of a HOQF setting procedure]

Key operated

LED display

Operation

Displays the operation frequency (operation stopped).

(When standard monitor display selection H=[Operation

frequency])

Displays the first basic parameter [History (CWJ)].

MODE

CWJ

HOQF

Press either the

key or

key to select “HOQF”.

3

Press ENTER key to display the parameter setting. (Default setting: ).

Change the parameter to (Operation panel) by pressing the

key.

⇔HOQF

Press the ENTER key to save the changed parameter. HOQF and the

parameter set value are displayed alternately.

*Pressing the MODE key twice returns the display to standard monitor mode (displaying operation frequency).

(1)Setting the frequency using the potentiometer on the inverter main unit

(HOQF=)

Set the frequency with the notches on the potentiometer.

Move clockwise for the higher frequencies.

The potentiometer has hysteresis. So the set value may slightly change when the inverter is turned off, and then turned back on.

(2)Setting the frequency using the operation panel (HOQF=)

Set the frequency with the operation panel..

: Moves the frequency up : Moves the frequency down

Example of operating a run from the panel

	Key operated				LED display					Operation
						Displays the operation frequency.
						(When standard monitor display selection H= [Operation
						frequency])
						Set the operation frequency.


					⇔HE	Press the ENT key to save the operation frequency. HE and the
					⇔HE	frequency are displayed alternately.
						frequency are displayed alternately.

						Pressing the		key or the		key will change the operation frequency



						even during operation.
						even during operation.

21

Image 22

Contents For 3-phase induction motors Industrial InverterSafety precautions Safety precautionsMeanings of symbols Explanation of markingsGeneral Operation Transportation & installation WiringOperations When retry function is selected inverter Maintenance and inspection Contents  Read first Check product purchaseCD-ROM E6581167 Contents of the product InstallationStandard connections Standard connection diagramConnection VF-S11FLA FLCFLB PLC OUTPower circuit Power circuit terminalsSelection of wiring materials Description of terminalsControl circuit terminals 24VDC PLC Control circuit terminalsSW1 VIAPTC FLB FLARY RC Slide switch SW1PLC Source Positive logic SW1 Source PLC Sink Eoqf OperationsSimplified Operation of the VF-S11 HoqfCoast stop How to start and stopStart and stop using the operation panel keys EOQF= HOQF= How to set the frequencyExample of operating a run from the panel Setting the frequency using the operation panel HOQF= or Frequency settingHow to operate the VF-S11 Running and stopping using the operation panelEx.2 Running and stopping using external signals Ex.3VIA Panel jog mode Status monitor mode Mode for monitoring all inverter statusBasic VF-S11 operations Standard monitor mode Flow of status monitor modePast trip record detained monitor mode When you adjust the inverter repeatedly using How to set parametersParameters for detailed and special setting. See Same parameter. Parameter name CWJ. See How to set the basic parameters⇔HJ How to set extended parameters～H Example of parameter setting Search and resetting of changed parameters I4WHow to search and reprogram parameters ⇔ CEE Parameters that cannot be changed while running How to use the history function⇔CEE How to save/load the user setting parameters Returning all parameters to standard default settingKpkv Monitoring the operation status Status monitor modeStatus monitor under normal conditions Iiii Pgtt ⇔ Display of detailed information on a past trip Display of trip information at the occurrence of a trip Display of trip informationTrip code display Example of call-up of trip informationOFF VIA VIB RES QR ⇔Cumulative E6581160 Measures to satisfy the standards How to cope with the CE directiveAbout the EMC directive Measures to satisfy the EMC directive Three-phase 500V class Example of wiring About the low-voltage directiveMeasures to satisfy the low-voltage directive Compliance with InstallationCompliance with UL Standard and CSA Standard Compliance with ConnectionAIC a AIC, Fuse and Wire sizesMotor thermal protection AWGBasic parameters Table of parameters and dataUser parameters Four navigation functionsCEE QNO Extended parameters Input/output parametersFrequency parameters Operation mode parameters Torque boost parameters Acceleration/deceleration time parameters Protection parameters Output parameters Operation panel parametersCommunication parameters PM motor parameters Default settings by inverter rating XD／H Table of input terminal functions AD2+SS3+AD2 , H, H, HTable of output terminal functions AD3On QE-,QR-,QJ, ,QJ,WR,GH,WE,QN-,QNT Fcvibn Models and their standard specifications SpecificationsStandard specifications Common specification CharacteristicsSpecification Outside dimensions and mass Outside dimensions and massOutline drawing VF-S11Fig.D Before making a service call Trip information and remedies Trip causes/warnings and remediesQNT Industrial and Power Systems & Services Company