Toshiba VF-S11 manual When retry function is selected inverter, Maintenance and inspection

Page 6

E6581160

Warning

Observe all permissible operating ranges of motors and mechanical equipment. (Refer to the motor's instruction manual.)

Not observing these ranges may result in injury.

Prohibited

When sequence for restart after a momentary failure is selected (inverter)

Warning

Stand clear of motors and mechanical equipment.

If the motor stops due to a momentary power failure, the equipment will start suddenly after power recovers. This could result in unexpected injury.

Mandatory Attach warnings about sudden restart after a momentary power failure on inverters, motors and equipment for prevention of accidents in advance.

When retry function is selected (inverter)

Warning

Stand clear of motors and equipment.

If the motor and equipment stop when the alarm is given, selection of the retry function will restart them suddenly after the specified time has elapsed. This could result in unexpected injury.

Mandatory Attach warnings about sudden restart in retry function on inverters, motors and equipment for prevention of accidents in advance.

Maintenance and inspection

Danger

Do not replace parts.

This could be a cause of electric shock, fire and bodily injury. To replace parts, call the local sales agency.

Prohibited

The equipment must be inspected every day.

If the equipment is not inspected and maintained, errors and malfunctions may not be discovered and that could result in accidents.

Before inspection, perform the following steps.

Mandatory

(1)

Turn off all input power to the inverter.

(2)

Wait at least ten minutes and check to make sure that the charge lamp is no longer lit.

 

(3)

Use a tester that can measure DC voltages (800VDC or more), and check to make sure that the

 

 

voltage to the DC main circuits (across PA-PC) is 45V or less.

 

If inspection is performed without performing these steps first, it could lead to electric shock.

I

5

Image 6
Contents For 3-phase induction motors Industrial InverterSafety precautions Safety precautionsMeanings of symbols Explanation of markings General Operation Transportation & installation WiringOperations When retry function is selected inverter Maintenance and inspection Contents  Read first Check product purchaseCD-ROM E6581167 Contents of the product InstallationStandard connections Standard connection diagramConnection VF-S11FLA FLCFLB PLC OUTPower circuit Power circuit terminalsSelection of wiring materials Description of terminalsControl circuit terminals 24VDC PLC Control circuit terminalsSW1 VIAPTC FLB FLARY RC Slide switch SW1PLC Source Positive logic SW1 Source PLC Sink Eoqf OperationsSimplified Operation of the VF-S11 HoqfCoast stop How to start and stopStart and stop using the operation panel keys EOQF= How to set the frequency HOQF=Example of operating a run from the panel Setting the frequency using the operation panel HOQF= or  Frequency settingHow to operate the VF-S11 Running and stopping using the operation panelEx.2 Running and stopping using external signals Ex.3VIA Status monitor mode Mode for monitoring all inverter status Panel jog modeBasic VF-S11 operations Flow of status monitor mode Standard monitor modePast trip record detained monitor mode When you adjust the inverter repeatedly using How to set parametersParameters for detailed and special setting. See Same parameter. Parameter name CWJ. SeeHow to set the basic parameters ⇔HJ How to set extended parameters ~H Search and resetting of changed parameters I4W Example of parameter settingHow to search and reprogram parameters   ⇔ CEE How to use the history function Parameters that cannot be changed while running⇔CEE Returning all parameters to standard default setting How to save/load the user setting parametersKpkv Status monitor mode Monitoring the operation statusStatus monitor under normal conditions Iiii Pgtt ⇔ Display of detailed information on a past trip Display of trip information at the occurrence of a trip Display of trip informationTrip code display Example of call-up of trip informationOFF VIA VIB RES QR ⇔Cumulative E6581160 How to cope with the CE directive Measures to satisfy the standardsAbout the EMC directive Measures to satisfy the EMC directive Three-phase 500V class Example of wiring About the low-voltage directiveMeasures to satisfy the low-voltage directive Compliance with InstallationCompliance with UL Standard and CSA Standard Compliance with ConnectionAIC a AIC, Fuse and Wire sizesMotor thermal protection AWGBasic parameters Table of parameters and dataUser parameters Four navigation functionsCEE QNO Extended parameters Input/output parametersFrequency parameters   Operation mode parameters   Torque boost parameters Acceleration/deceleration time parameters Protection parameters  Output parameters Operation panel parametersCommunication parameters PM motor parameters Default settings by inverter rating XD/H       Table of input terminal functions AD2+SS3+AD2 , H, H, HTable of output terminal functions AD3,QJ,WR,GH,WE, On QE-,QR-,QJ,QN-,QNT Fcvibn Specifications Models and their standard specificationsStandard specifications Common specification CharacteristicsSpecification Outside dimensions and mass Outside dimensions and massOutline drawing VF-S11Fig.D Before making a service call Trip information and remedies Trip causes/warnings and remediesQNT   Industrial and Power Systems & Services Company