Toshiba VF-S11 manual Returning all parameters to standard default setting, Kpkv

Page 36

E6581160

4.2.6Returning all parameters to standard default setting

Setting the standard default setting parameter V[R=, all parameters can be returned to the those factory default settings.

Note: For more details on the standard default setting parameter V[R, see 5.6.

Notes on operation

• We recommend that before this operation you write down on paper the values of those parameters,

because when setting V[R=, all parameters with changed values will be returned to standard factory default setting.

• Note that HO, HOUN, H, f470-f473, H and H will not be reset to their

factory default settings.	4
factory default settings.

QSteps for returning all parameters to standard default setting

Key operated

LED display

Operation

Displays the operation frequency (perform during operation stopped).

The first basic parameter “CWJ” (history function) is displayed.

MODE

CWJ

V[R

Press the

key or the

key to change to V[R.

Pressing the ENTER key displays the programmed parameters.

(V[R will always display "(zero)" on the right, the previous setting

on the left.)

Press the

key or the

key to change the set value.

To return to standard factory default setting, change to "".

KPKV

Pressing the ENTER key displays "KPKV" while returning all

parameters to factory default setting.

The monitor returns to the display of setup parameters.

If there is anything you do not understand during this operation, press the MODE key several times to start over from the step of CWJ display.

4.2.7How to save/load the user setting parameters

The current settings of all parameters can be stored (saved) in memory at a time by setting the standard setting mode selection parameter V[p to 7. Also, all parameter settings stored in memory can be restored (loaded) by setting parameter V[p to 8. This means that you can use this parameter (V[p=7 and 8) as the parameter for your own initial settings (default settings).

35

Image 36

Contents For 3-phase induction motors Industrial InverterSafety precautions Meanings of symbolsSafety precautions Explanation of markingsGeneral Operation Transportation & installation WiringOperations When retry function is selected inverter Maintenance and inspection Contents  Read first Check product purchaseCD-ROM E6581167 Contents of the product InstallationStandard connection diagram ConnectionStandard connections VF-S11FLC FLBFLA PLC OUTPower circuit terminals Selection of wiring materialsPower circuit Description of terminalsControl circuit terminals Control circuit terminals SW124VDC PLC VIAPTC FLB FLARY RC Slide switch SW1PLC Source Positive logic SW1 Source PLC Sink Operations Simplified Operation of the VF-S11Eoqf HoqfHow to start and stop Start and stop using the operation panel keys EOQF=Coast stop How to set the frequency HOQF=Example of operating a run from the panel Setting the frequency using the operation panel HOQF= or Frequency settingHow to operate the VF-S11 Running and stopping using the operation panelEx.2 Running and stopping using external signals Ex.3VIA Status monitor mode Mode for monitoring all inverter status Panel jog modeBasic VF-S11 operations Flow of status monitor mode Standard monitor modePast trip record detained monitor mode How to set parameters Parameters for detailed and special setting. SeeWhen you adjust the inverter repeatedly using Same parameter. Parameter name CWJ. SeeHow to set the basic parameters ⇔HJ How to set extended parameters ～H Search and resetting of changed parameters I4W Example of parameter settingHow to search and reprogram parameters ⇔ CEE How to use the history function Parameters that cannot be changed while running⇔CEE Returning all parameters to standard default setting How to save/load the user setting parametersKpkv Status monitor mode Monitoring the operation statusStatus monitor under normal conditions Iiii Pgtt ⇔ Display of detailed information on a past trip Display of trip information Trip code displayDisplay of trip information at the occurrence of a trip Example of call-up of trip informationOFF VIA VIB RES QR ⇔Cumulative E6581160 How to cope with the CE directive Measures to satisfy the standardsAbout the EMC directive Measures to satisfy the EMC directive Three-phase 500V class Example of wiring About the low-voltage directiveCompliance with Installation Compliance with UL Standard and CSA StandardMeasures to satisfy the low-voltage directive Compliance with ConnectionAIC, Fuse and Wire sizes Motor thermal protectionAIC a AWGTable of parameters and data User parametersBasic parameters Four navigation functionsCEE QNO Extended parameters Input/output parametersFrequency parameters Operation mode parameters Torque boost parameters Acceleration/deceleration time parameters Protection parameters Output parameters Operation panel parametersCommunication parameters PM motor parameters Default settings by inverter rating XD／H Table of input terminal functions AD2+SS3+AD2 , H, H, HTable of output terminal functions AD3,QJ,WR,GH,WE, On QE-,QR-,QJ,QN-,QNT Fcvibn Specifications Models and their standard specificationsStandard specifications Common specification CharacteristicsSpecification Outside dimensions and mass Outside dimensions and massOutline drawing VF-S11Fig.D Before making a service call Trip information and remedies Trip causes/warnings and remediesQNT Industrial and Power Systems & Services Company