Desa 100271-01 owner manual Trimming a Tree Pruning, Before Felling a Tree

Page 12

®

ELECTRIC CHAIN SAW

OPERATING CHAIN SAW

Continued

TRIMMING A TREE (Pruning)

WARNING: Avoid kickback. Kickback can result in severe in- jury or death. See Kickback, pages 3 and 4, to avoid risk of kickback.

WARNING: Do not operate chain saw while

•in a tree

•on a ladder or any other un- stable surface

•in any awkward position

You may lose control of saw caus- ing severe injury.

WARNING: Do not cut limbs higher than your shoulders.

Trimming a tree is the process of cutting limbs from a living tree. Make sure your footing is firm. Keep feet apart. Divide your weight evenly on both feet. Follow direc- tions below to trim a tree.

1.Make first cut 15 centimeters from tree trunk on underside of limb. Use top of guide bar to make this cut. Cut 1/3 through diameter of limb (see Figure 11).

2.Move five to ten centimeters farther out on limb. Make second cut from above limb. Continue cut until you cut limb off.

3.Make third cut as close to tree trunk as possible on underside of limb stub. Use top of guide bar to make this cut. Cut 1/3 through diameter of stub.

4.Make fourth cut directly above third cut. Cut down to meet third cut. This will remove limb stub.

CAUTION: Seek professional help if facing conditions beyond your ability.

2nd Cut - Pruning

Cut (to avoid

4th Cut - pinching) Final

Stub Cut

15 cm

5 to 10 cm

1st Cut - Pruning Undercut (to avoid splintering)

3rd Cut - Stub Undercut (to avoid splintering)

Figure 11 - Cutting A Limb

FELLING A TREE (Cutting Down a Tree)

WARNING

•Avoid kickback. Kickback can result in severe injury or death. See Kickback, pages 3 and 4, to avoid risk of kickback.

•Do not fell a tree without ample skill or expert help.

•Keep children, animals, and bystanders away from area when felling a tree.

•If two or more persons per- form bucking and felling op- erations at the same time, pro- vide ample distance between operations. Provide distance of at least twice the height of tree being felled.

WARNING: When felling a tree, be aware of your surroundings. Do not endanger any person, strike utility lines, or cause property damage. If tree strikes utility lines, contact utility company at once.

CAUTION: Seek professional help if facing conditions beyond your ability.

Felling is the process of cutting down a tree. Make sure your footing is firm. Keep feet apart. Divide your weight evenly on both feet. Follow directions below to fell a tree.

Before Felling a Tree

1.Before felling, inspect tree. Make sure there are no dead limbs or branches that may fall on you. Study natural lean of tree, location of larger branches, and wind direction. This will help you judge which way tree will fall.

2.Clear work area around tree.

3.Plan and clear a retreat path before fell- ing. Make retreat path opposite to planned direction of fall of tree and at 45° angle (see Figure 12).

4.Remove dirt, stones, loose bark, nails, staples, and wire from tree where you will make felling cuts.

5.Stay on uphill side when felling tree. Tree could roll or slide downhill after falling.

Retreat

Path

Direction

of Fall

45°

Retreat

Tree

Path

 

Figure 12 - Retreat Path From Tree

10

102891

Page 11 Page 13
Image 12
Page 11 Page 13
Contents MODEL/MODELL/MODÈLE 100271-01230V~ 50Hz 1450W 102891 Electric Chain SAW Information Symbols Safety Information Warnings Appears Throughout This ManualSafety Kickback Safety Devices On This SawBefore Operating Chain SAW KickbackSaw Maintenance and Kickback Safety Secure wood you are cutting by using clamps or chocksPushback and PULL-IN Chain SAW OperationMaintenance and Storage of Chain SAW Chain SAW Names and TermsRear Handle Handle located at rear of saw body Reduced Kickback Guide Bar GuideAssembly Important Do not clamp chain saw in vise during assemblyProduct Identification UnpackingFilling OIL Tank Assembling Guide Bar, Chain, and Hand GuardSAW Chain Tension Adjustment Operating Chain SAWExtension Cords Oiling Chain Chain BrakeCutting with the Chain SAW Trimming a Tree Pruning Before Felling a TreeFelling Procedure Limbing a TreeFelling Notch Felling CutCleaning and Maintenance Cleaning SAW BodyBucking a LOG Normal Guide Bar Maintenance Care of Guide BARSharpening Your SAW Chain Items Needed to Sharpen ChainReplacement Parts RecyclingStorage Troubleshooting Observed Fault Possible Cause RemedyWarranty Information Importer Manufacturer Desa Europe B.VElektrische Kettingzaag Gebruikershandleiding Betekenis Symbolen Elektrische KettingzaagWAARSCHUWIN- GEN Alvorens DE Kettingzaag TE GebruikenTerugslag Veiligheidsvoorzieningen tegen terugslagDuwen EN Trekken MET DE Kettingzaag WerkenKettingzaagonderhoud en terugslagveiligheid Oorzaken van duwen en trekkenDE Kettingzaag Onderhouden EN Opbergen Breng de beschermkap aanBenamingen EN Termen UitpakkenIdentificatie VAN Onderdelen MontageOlie Bijvullen DE Spanning VAN DE Ketting BIJ- StellenNing van de ketting bij te stellen DE Kettingzaag Bedienen VerlengsnoerenDE Ketting Olien Zagen DE KettingremEEN Boom Snoeien EEN Boom Omzagen VeltechniekAlvorens een boom om te zagen ValkerfTakken Verwijderen EEN Stam in Stukken ZagenSchoonmaak EN Onderhoud DE Behuizing SchoonmakenDe stam ligt over de gehele lengte op de grond De stam is aan één uiteinde ondersteundZorg Voor DE Kettinggeleider DE Ketting SlijpenNormaal onderhoud van de kettinggeleider Gereedschap benodigd voor het slijpen van de kettingDe dieptebegrenzers van de snijtanden vijlen De ketting vervangenDE Kettingzaag Opbergen VERVANGINGS- OnderdelenWaarschuwing Gebruik uitsluitend in deze handleiding Onderdeelnummer OmschrijvingProblemen Oplossen PaginaDe olietank leeglopen wanneer de zaag Langere tijd niet gebruikt wordtBeperkte Garantie Elektrische Kettingzaag Importeur Fabrikant Desa Europe B.VModèle 100271-01 230V~ 50Hz 145a0W Description Symboles Lire le manuel d’instructionsAvertissements Pour LA Sécurité Avant D’UTILISER LA TronçonneuseRecul Cause du reculPoussée ET Traction Utilisation DE LA TronçonneuseEntretien de la tronçonneuse et protection contre le recul Causes de la poussée et de la tractionVocabulaire DE LA Tronçonneuse Entretien ET Remisage DE LA TronçonneuseDans un endroit sec Nomenclature DES Pièces Tronçonneuse électriqueDéballage AssemblageRemplissage DU Réservoir D’HUILE Réglage DE LA Tension DE LA ChaîneUtilisation DE LA Tronçonneuse Rallonges DE CordonLubrification DE LA Chaîne Sciage Avec LA TronçonneuseFrein DE Chaîne Abattage D’UN Arbre Avant d’abattre un arbreProcédure D’ABATTAGE ÉbranchageSifflet d’abattage Trait d’abattageTronçonnage D’UNE Bille Toute la bille repose au solLa bille est soutenue à une extrémité La bille est soutenue aux deux extrémitésNettoyage ET Entretien Nettoyage DU Carter DE LA TronçonneuseEntretien DE LA LAME- Guide Affûtage DE LA ChaîneRemplacement de la chaîne Affûtage des taillantsLimage des limiteurs de profondeur des taillants Recyclage RemisagePièces DE Rechange Remiser la chaîneDépannage Instructions D’UTILISATION Information SUR LA Garantie Importateur Fabricant Desa Europe B.VModell 100271-01230V~ 50Hz 1450W Elektrokettensäge Erklärung ZeichenSICHERHEITS- Hinweise VOR Gebrauch DER MotorsägeRückprall Rückprall- Sicherheitsvorrichtungen an dieser SägeSTOSS- UND Reisskräfte BetriebssicherheitWartung der Säge und Rückprallsicherheit Die Ursache von Stoß- und ReißkräftenWarten UND Lagern DER Motorsäge BEGRIFF- Serklärungen DIE Teile DER MotorsägeVorderer Handgriff Befindet sich am vor- deren Sägenrumpf Auspacken ZusammenbauFüllen DES Ölbehälters Einstellen DER SÄGEKETTEN- SpannungGebrauch DER Motorsäge VerlängerungskabelÖlen DER Kette SägeanleitungKettenbremse Fällen Eines BaumsVom Baum aus Fällanleitung Vor dem Fällen eines BaumsFallkerb FällschnittEntasten Eines Baums AblängenStamm liegt der Länge nach auf dem Boden Stamm an einem Ende aufgebocktReinigung UND Wartung Reinigen DES SägenrumpfesPflege DES Schwertes Routinewartung DES SchwertesSchärfen DER Sägekette Zum Schärfen der Kette benötigtes WerkzeugSchärfen der Schneidezähne Wiederver Wertung LagerungErsatzteile Störungssuche Säge schneidet nur unter starkem Druck Kette ist stumpfÖl ist zu zähflüssig Öl mit einer geeigneten Viskosität ver Schwert und Kette nicht richtig zusamNotizen Garantie Bitte GUT AufbewahrenBefristete Garantie Importeur Hersteller102891 Desa Europe B.V

100271-01 specifications

Desa 100271-01 is an innovative and efficient solution designed to enhance agricultural practices. Targeted primarily at small to medium-sized farms, this technology integrates advanced features that optimize farming processes, ultimately improving yield and reducing operational costs.

One of the standout features of Desa 100271-01 is its precision agriculture capability. Utilizing GPS and IoT (Internet of Things) technologies, the system enables farmers to manage their fields more effectively. The GPS technology ensures accurate field mapping, allowing for more efficient planting patterns and resource distribution. By monitoring crop health through real-time data collection, farmers can make informed decisions regarding watering, fertilization, and pest control, leading to healthier crops and minimized waste.

The platform is designed with user-friendliness in mind. Its intuitive interface allows farmers of varying technical backgrounds to navigate the system easily. Training is often included as part of the purchase, ensuring that users can maximize the potential of the Desa 100271-01 right from the start. Additionally, compatibility with mobile devices enables farmers to access information and controls from the field, enhancing operational flexibility.

Another notable characteristic is its sustainability focus. The Desa 100271-01 promotes eco-friendly agricultural practices by providing data-driven insights that help reduce water and fertilizer usage. This not only contributes to lower operational costs but also supports environmental conservation efforts.

In terms of connectivity, Desa 100271-01 employs robust wireless technologies to facilitate communication between various devices on the farm. This interconnectivity allows for real-time monitoring and control of agricultural equipment, leading to enhanced efficiency. The system can be integrated with existing farm machinery, making it a versatile addition to any agricultural setup.

Furthermore, the Desa 100271-01 is designed to withstand challenging agricultural environments. Its durable construction and weather-resistant features ensure reliable performance, even in adverse conditions.

Overall, Desa 100271-01 represents a significant advancement in agricultural technology. With its precision farming capabilities, user-friendly interface, sustainability initiatives, and robust connectivity, it stands out as a valuable asset for modern agricultural practices, contributing to increased efficiency and profitability for farmers.
Top Page Image Contents