Desa 100271-01 owner manual Chain SAW Names and Terms, Maintenance and Storage of Chain SAW

Page 7

OWNER’S MANUAL

SAFETY

WARNINGS

Continued

MAINTENANCE AND STORAGE OF CHAIN SAW

1.Unplug chain saw from power source

•when not in use

•before moving from one place to an- other

•before servicing

•before changing accessories or at- tachments

2.Inspect chain saw before and after each use. Check saw closely if guard or other part has been damaged. Check for any damage that may affect operator safety or operation of saw. Check for align- ment or binding of moving parts. Check that switch turns motor on and off. Check chain brake. Check for broken or damaged parts. Do not use chain saw if damage affects safety or operation. Have damage repaired by authorized service person.

3.Maintain chain saw with care.

•Never expose saw to rain.

•Keep chain sharp, clean, and lubri- cated.

•Follow steps outlined in this manual to sharpen chain.

•Keep handles dry, clean, and free of oil.

•Keep all screws and nuts tight.

•Inspect power cord often. If dam- aged, have repaired by authorized service person.

•Never carry chain saw by power cord.

•Never yank power cord to unplug it.

•Keep power cord from heat, oil, and sharp edges.

•Inspect extension cords often and replace if damaged.

4.When servicing, use only identical re- placement parts.

5.Always store chain saw

•in a high or locked place, out of children’s reach

•in a dry place

•in a carrying case or with scabbard over guide bar

Keep this manual for reference. It is your guide to safe and proper operation of this chain saw.

CHAIN SAW NAMES AND TERMS

Bucking Process of cutting a felled tree or log into lengths.

Felling Process of cutting down a tree.

Felling Cut Final cut when felling a tree. Make this cut on opposite side of tree from notching cut.

Front Hand Guard Shield between front handle and guide bar. Protects left hand while using saw. When kickback occurs, the front hand guard is moved forward by the back of operator’s left hand. This stops the saw chain quickly, reducing the chance of serious injury.

Front Handle Located at front of saw body.

Guide Bar Metal bar that extends from saw body. The guide bar supports and guides chain.

Guide Bar Nose Tip or end of guide bar.

Kickback Quick backward and upward motion of guide bar. Kickback may occur when tip of guide bar touches an object while chain is moving. The guide bar will kick up and back towards operator.

Limbing Process of cutting limb(s) from a felled tree.

Low-Kickback Chain Chain that reduces chance of kickback as required by ANSI B175.1.

Normal Cutting Position Stance used while making bucking and felling cuts.

Notching Cut Notch cut in tree that directs fall of tree.

Oiler Control System for oiling guide bar and chain.

Power Head Chain saw without chain and guide bar. Also known as saw body.

Pushback (Kickback, Pinch) Rapid pushback of chain saw. Pushback may oc- cur if chain along top of guide bar is pinched, caught, or contacts a foreign object.

Rear Handle Handle located at rear of saw body.

Reduced Kickback Guide Bar Guide

bar that reduces chance of kickback.

Replacement Chain Chain that complies with ANSI B175.1 when used with a specific saw. It may not meet ANSI requirements when used with other saws.

Saw Chain (Chain) Loop of chain having cutting teeth for cutting wood. The motor drives chain. The guide bar supports chain.

Spiked Bumper (Spike) Pointed teeth at front of saw body beside guide bar. Keep spiked bumper in contact with wood when felling or bucking. It helps maintain posi- tion of saw while cutting.

Sprocket Toothed wheel that drives chain.

Switch Device that completes or interrupts electrical circuit to motor of saw.

Switch Linkage This device connects switch to trigger. It moves switch when you squeeze trigger.

Switch Lockout Device that reduces ac- cidental starting of saw.

Trigger Device that turns saw on and off. Squeezing trigger turns saw on. Releasing trigger turns saw off.

Trimming (Pruning) Process of cutting limb(s) from a living tree.

Undercut An upward cut from underside of log or limb. This is done while in normal cutting position and cutting with top of guide bar.

102891

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents MODEL/MODELL/MODÈLE 100271-01230V~ 50Hz 1450W 102891 Electric Chain SAW Safety Information Warnings Appears Throughout This Manual Information SymbolsKickback SafetyKickback Safety Devices On This Saw Before Operating Chain SAWChain SAW Operation Saw Maintenance and Kickback SafetySecure wood you are cutting by using clamps or chocks Pushback and PULL-INReduced Kickback Guide Bar Guide Maintenance and Storage of Chain SAWChain SAW Names and Terms Rear Handle Handle located at rear of saw bodyUnpacking AssemblyImportant Do not clamp chain saw in vise during assembly Product IdentificationAssembling Guide Bar, Chain, and Hand Guard Filling OIL TankOperating Chain SAW SAW Chain Tension AdjustmentExtension Cords Chain Brake Oiling ChainCutting with the Chain SAW Before Felling a Tree Trimming a Tree PruningFelling Cut Felling ProcedureLimbing a Tree Felling NotchCleaning SAW Body Cleaning and MaintenanceBucking a LOG Items Needed to Sharpen Chain Normal Guide Bar MaintenanceCare of Guide BAR Sharpening Your SAW ChainRecycling Replacement PartsStorage Observed Fault Possible Cause Remedy TroubleshootingImporter Manufacturer Desa Europe B.V Warranty InformationElektrische Kettingzaag Gebruikershandleiding Elektrische Kettingzaag Betekenis SymbolenVeiligheidsvoorzieningen tegen terugslag WAARSCHUWIN- GENAlvorens DE Kettingzaag TE Gebruiken TerugslagOorzaken van duwen en trekken Duwen EN TrekkenMET DE Kettingzaag Werken Kettingzaagonderhoud en terugslagveiligheidBreng de beschermkap aan DE Kettingzaag Onderhouden EN OpbergenUitpakken Benamingen EN TermenMontage Identificatie VAN OnderdelenDE Spanning VAN DE Ketting BIJ- Stellen Olie BijvullenNing van de ketting bij te stellen Verlengsnoeren DE Kettingzaag BedienenDE Ketting Olien DE Kettingrem ZagenEEN Boom Snoeien Valkerf EEN Boom OmzagenVeltechniek Alvorens een boom om te zagenEEN Stam in Stukken Zagen Takken VerwijderenDe stam is aan één uiteinde ondersteund Schoonmaak EN OnderhoudDE Behuizing Schoonmaken De stam ligt over de gehele lengte op de grondGereedschap benodigd voor het slijpen van de ketting Zorg Voor DE KettinggeleiderDE Ketting Slijpen Normaal onderhoud van de kettinggeleiderDe ketting vervangen De dieptebegrenzers van de snijtanden vijlenOnderdeelnummer Omschrijving DE Kettingzaag OpbergenVERVANGINGS- Onderdelen Waarschuwing Gebruik uitsluitend in deze handleidingLangere tijd niet gebruikt wordt Problemen OplossenPagina De olietank leeglopen wanneer de zaagImporteur Fabrikant Desa Europe B.V Beperkte Garantie Elektrische KettingzaagModèle 100271-01 230V~ 50Hz 145a0W Lire le manuel d’instructions Description SymbolesCause du recul Avertissements Pour LA SécuritéAvant D’UTILISER LA Tronçonneuse ReculCauses de la poussée et de la traction Poussée ET TractionUtilisation DE LA Tronçonneuse Entretien de la tronçonneuse et protection contre le reculEntretien ET Remisage DE LA Tronçonneuse Vocabulaire DE LA TronçonneuseDans un endroit sec Tronçonneuse électrique Nomenclature DES PiècesAssemblage DéballageRallonges DE Cordon Remplissage DU Réservoir D’HUILERéglage DE LA Tension DE LA Chaîne Utilisation DE LA TronçonneuseSciage Avec LA Tronçonneuse Lubrification DE LA ChaîneFrein DE Chaîne Avant d’abattre un arbre Abattage D’UN ArbreTrait d’abattage Procédure D’ABATTAGEÉbranchage Sifflet d’abattageLa bille est soutenue aux deux extrémités Tronçonnage D’UNE BilleToute la bille repose au sol La bille est soutenue à une extrémitéAffûtage DE LA Chaîne Nettoyage ET EntretienNettoyage DU Carter DE LA Tronçonneuse Entretien DE LA LAME- GuideAffûtage des taillants Remplacement de la chaîneLimage des limiteurs de profondeur des taillants Remiser la chaîne RecyclageRemisage Pièces DE RechangeDépannage Instructions D’UTILISATION Importateur Fabricant Desa Europe B.V Information SUR LA GarantieModell 100271-01230V~ 50Hz 1450W Erklärung Zeichen ElektrokettensägeRückprall- Sicherheitsvorrichtungen an dieser Säge SICHERHEITS- HinweiseVOR Gebrauch DER Motorsäge RückprallDie Ursache von Stoß- und Reißkräften STOSS- UND ReisskräfteBetriebssicherheit Wartung der Säge und RückprallsicherheitWarten UND Lagern DER Motorsäge DIE Teile DER Motorsäge BEGRIFF- SerklärungenVorderer Handgriff Befindet sich am vor- deren Sägenrumpf Zusammenbau AuspackenEinstellen DER SÄGEKETTEN- Spannung Füllen DES ÖlbehältersSägeanleitung Gebrauch DER MotorsägeVerlängerungskabel Ölen DER KetteFällen Eines Baums KettenbremseVom Baum aus Fällschnitt FällanleitungVor dem Fällen eines Baums FallkerbStamm an einem Ende aufgebockt Entasten Eines BaumsAblängen Stamm liegt der Länge nach auf dem BodenRoutinewartung DES Schwertes Reinigung UND WartungReinigen DES Sägenrumpfes Pflege DES SchwertesZum Schärfen der Kette benötigtes Werkzeug Schärfen DER SägeketteSchärfen der Schneidezähne Lagerung Wiederver WertungErsatzteile Schwert und Kette nicht richtig zusam StörungssucheSäge schneidet nur unter starkem Druck Kette ist stumpf Öl ist zu zähflüssig Öl mit einer geeigneten Viskosität verNotizen Importeur Hersteller GarantieBitte GUT Aufbewahren Befristete Garantie102891 Desa Europe B.V

100271-01 specifications

Desa 100271-01 is an innovative and efficient solution designed to enhance agricultural practices. Targeted primarily at small to medium-sized farms, this technology integrates advanced features that optimize farming processes, ultimately improving yield and reducing operational costs.

One of the standout features of Desa 100271-01 is its precision agriculture capability. Utilizing GPS and IoT (Internet of Things) technologies, the system enables farmers to manage their fields more effectively. The GPS technology ensures accurate field mapping, allowing for more efficient planting patterns and resource distribution. By monitoring crop health through real-time data collection, farmers can make informed decisions regarding watering, fertilization, and pest control, leading to healthier crops and minimized waste.

The platform is designed with user-friendliness in mind. Its intuitive interface allows farmers of varying technical backgrounds to navigate the system easily. Training is often included as part of the purchase, ensuring that users can maximize the potential of the Desa 100271-01 right from the start. Additionally, compatibility with mobile devices enables farmers to access information and controls from the field, enhancing operational flexibility.

Another notable characteristic is its sustainability focus. The Desa 100271-01 promotes eco-friendly agricultural practices by providing data-driven insights that help reduce water and fertilizer usage. This not only contributes to lower operational costs but also supports environmental conservation efforts.

In terms of connectivity, Desa 100271-01 employs robust wireless technologies to facilitate communication between various devices on the farm. This interconnectivity allows for real-time monitoring and control of agricultural equipment, leading to enhanced efficiency. The system can be integrated with existing farm machinery, making it a versatile addition to any agricultural setup.

Furthermore, the Desa 100271-01 is designed to withstand challenging agricultural environments. Its durable construction and weather-resistant features ensure reliable performance, even in adverse conditions.

Overall, Desa 100271-01 represents a significant advancement in agricultural technology. With its precision farming capabilities, user-friendly interface, sustainability initiatives, and robust connectivity, it stands out as a valuable asset for modern agricultural practices, contributing to increased efficiency and profitability for farmers.
Top Page Image Contents