Husqvarna FS 413 manual Contents and Introduction

CONTENTS and INTRODUCTION

Contents
Section	Page
Contents & Introduction	3
Symbols and Decals	4-8
Safety Instructions	9-13
Parts Identification (What Is What)	14-15
Assembly	16-20
Operation	21-25
Maintenance & Lubrication	27-28
Trouble Shooting Guide	29
Wiring diagram	30
Technical Data	31-32
Accessories	33
Conformity Certificates	34
Contact Information	35

Introduction

Thank you for purchasing your new machine from Husqvar- na Construction Products. We have provided important safety messages in this manual and on the machine. Please read these messages carefully. A safety message alerts you to potential hazards that could hurt you or oth- ers. Each safety message is preceded by a symbol or the safety alert symbol () and one of two words, WARNING, or CAUTION.

These signal words mean:

WARNING: Indicates a hazardous situation which, if not avoided COULD result in death or serious injury.

CAUTION: Indicates a hazardous situation, which, if not avoided, COULD result in minor or moderate injury. It may also be used to alert against unsafe practices.

Each message tells you what the hazard is, what can hap- pen, and what you can do to avoid or reduce injury. Other important messages are preceded by the word NOTICE.

NOTICE means:

NOTICE: Indicates a hazardous situation which, if not avoided, could result in property damage. Your machine or other property can be damaged if you don’t follow this instruction.

The safety labels should be periodically inspected and cleaned by the user to maintain good legibility at a safe viewing distance. If the label is worn, damaged, or is illeg- ible, it should be replaced.

WARNING!

Before operating machine, read and under- stand this entire operation manual & engine operation manual supplied with engine.

Be familiar with machine before operation!

Model Identification: Record machine serial number plate information below for future reference

A.Model:______________________________________

B.Machine Serial No:____________________________

C.Year of Manufacture ___________________________

D.Mass of Machine (kg) __________________________

E.Engine Power (KW) ___________________________

F.Blade Diameter (mm) __________________________

G.Blade Speed (Revolutions / Minute) _______________

H.Electric Motor Voltage (If Equipped) _______________

I.Electric Motor Phase (If Equipped) _________________

J.Electric Motor Amperage (if Equipped) _____________

Other information not shown on machine serial plate:

Engine Serial No: _______________________________

See Engine Operation Manual for location.

Purchase Date:_________________________________