Dial Plan Configuration File Commands 109
PreTranslatorEntry Create 1 2 1
PreTranslatorEntry Create 1 3 2
PreTranslatorEntry Create 1 4 3
PreTranslatorEntry Create 1 5 4
PreTranslatorEntry Create 1 6 5
PreTranslatorEntry Create 1 7 6
PreTranslatorEntry Create 1 8 7
PreTranslatorEntry Create 1 9 8
PreTranslatorEntry Create 1 10 9
PreTranslatorEntry Delete
Syntax
PreTranslatorEntry Delete nPreTranslatorId nEntryId
Description Deletes a pretranslator entry or deletes all entries for a
particular pretranslator.
Use caution when using this command to delete Pretranslator entries in
an existing Dial Plan. In general, it is best to delete all tables, routes, and
pretranslators at the beginning of each dial plan configuration file. This
precaution avoids the potential conflicts or unpredictable actions caused
by importing new dial plan entries on top of an existing dial plan.
For instructions on how to edit the dial plan configuration file to delete
existing tables, routes, and pretranslators, see “Creating Dial Plan
Configuration Files” on page 44.
Arguments
nPreTranslatorId — An integer in the range 1–32768.
nEntryId — An integer in the range 1–32768 or * for all entries.
Example: This command deletes pretranslator entry 3 from
pretranslator2.
PreTranslatorEntry Delete 2 3
This command deletes all pretranslator entries from pretranslator 2.
PreTranslatorEntry Delete 2 *
Normally this command is not necessary. It is better to delete an entire
dial plan rather than import a new dial plan over it. To accomplish this,
3Com recommends using specific commands at the top of every dial plan