260 CHAPTER 3: DEVICE CONFIGURATION
Viewing the Status of a T1 Card Channel
To view the status of a channel on an installed T1 Digital Line Card:
1On the Digital Line Cards tab, select either T1 Channel List (for T1 DS1
channels) or ISDN PRI Channel List (for T1 ISDN PRI channels) from the
Select Device Type drop-down list.
2Click Apply.
3Select the channel for which you want status information.
4Click Status. A Channel Status dialog box appears.
5The dialog box that appears depends on the channel list that you select.
6View the status of the channel.
7Refresh the Channel Status dialog box.
aFrom the Dialog Refresh drop-down list, select:
■Manual — To manually refresh the Channel Status dialog box each
time you click the Apply button.
■A time interval (5, 10, 15, 30, or 60 seconds) to automatically
refresh the Channel Status dialog box at the specified intervals.
bEnable the Device Refresh check box.
8Click Apply, and then click OK.
Viewing DSP (Digital Signal Processor) Details
To view DSP (Digital Signal Processor) details:
1On the Digital Line Cards tab, select T1/ISDN Board List from the Select
Device Type list and click Apply.
2Select the board you want and click Status.
3In the Board Status dialog box, select a DSP from the DSP List and click
Details.
4Click Close to close the DSP Status window.
5Click Apply to make the changes.
6Click OK.