Configuring the NBX 1105 Attendant Console 181
Park Maps the Call Park feature to this button. To park the
current call, the user must press the button and dial a
valid Call Park extension:
NBX 100: 601–609. NOTE: The NBX 100 is shipped
with a factory default 3-digit dial plan. If you import any
4-digit plan, you must manually specify any 4-digit
extension ranges that are not set by the imported plan.
SuperStack 3 NBX: 6000–6099. NOTE: The
Superstack 3 NBX is shipped with a 4-digit dial plan. If
you import any 3-digit plan, you must manually specify
any 3-digit extension ranges that are not set by the
imported plan.
Number — Not used.
Prty (Priority) — Not used.
You can also map a button to a specific Call Park
extension by choosing Line / Extension as the Type and
entering a Call Park extension in the Number box. Then,
when you are on a call and want to park it to the
mapped call park extension:
■Press the Call Park Access button (by default, the third
Access button below the PROGRAM button).
■Press the button to which you mapped the call park
extension.
To retrieve a parked call from a Call Park extension:
■Pick up your telephone handset.
■Press the button to which you mapped the Call Park
extension.
Table31 Attendant Console Button Mappings (continued)
Button Type Description