Configuring the NBX 1105 Attendant Console 163
3Enter the number of an extension you have previously removed in the
Extension field.
4Enter a name for the extension in the Name field.
5Click OK.
Changing the Name
of a Call Park
Extension
You can change the name of any Call Park extension.
To change the name of an extension:
1Select NBX NetSet > Device Configuration > Call Park.
2Select the extension name that you want to change. Click Modify. The
Modify Call Park dialog box appears.
3Enter the new name for the Call Park extension in the Name field.
4Click OK.
Removing a Call Park
Extension
You can remove a Call Park extension at any time.
To remove a Call Park extension:
1Select NBX NetSet > Device Configuration > Call Park.
2Select the extension that you want to remove.
3Click Remove. You are prompted to confirm that you want to remove this
extension.
4Click Yes.
To replace any extension that you remove, see “Adding a Call Park
Extension” on page 162.
Configuring the NBX 1105 Attendant Console
The NBX 1105 Attendant Console provides extended button mappings
and displays the current status of each extension. A receptionist typically
uses the Attendant Console to connect incoming calls to telephone
extensions.
This section describes how to configure the Attendant Console manually.
Alternatively, you can use Auto Discovery to add and configure the device
automatically, and then use the manual configuration procedures in this
section to fine-tune your mappings.