Configuring and Managing BRI-ST Digital Line Cards 225
Modifying IP Settings
for a BRI Card
You can modify the IP settings for a Digital Line Card to meet changing
requirements.
The card must be on the same subnetwork as the Call Processor to
modify IP settings.
To modify the IP settings of a BRI Digital Line Card:
1On the Digital Line Cards tab, from the Select Device Type drop-down list,
select T1/ISDN Board List.
2Click Apply.
3Select the BRI card for which you want to change the IP settings.
4Click IP Settings.
If there is no IP Settings button in the dialog box, you have not yet
installed the IP licenses. You must install them before you can proceed.
5To assign IP addresses, enter the first address in the FirstIP Address field.
The system sequentially adds the remaining addresses.
To assign IP addresses one at a time:
1In the Digital Line Card IP Settings dialog box, click Assign Addresses
Individually.
2Enter the desired IP addresses for the channels.
You must have IP licenses installed before you can enter addresses.
3Enter the mask number appropriate for your site in the Common Subnet
Mask field.
4Enter IP address for the Common Default Gateway.
5Click Apply.
6Click OK.
7In the Digital Line Card IP Settings dialog box dialog box, click OK.
Removing a BRI
Digital Line Card
You can remove a Digital Line Card at any time.
CAUTION: Removing a Digital Line Card may affect your Dial Plan.