Disk Mirroring 293
Reverting to a
Single-Disk System
If the disk mirroring is currently active, you can convert the system to
operate with a single disk. You need a Phillips screwdriver to complete
this process.
To revert to a single-disk system:
1Use Tab le 59 to determine which disk is the mirrored disk.
2Shut down the system. In NBX NetSet, select Operations >
Reboot/Shutdown > Shutdown.
3Remove the mirrored disk drive:
aUnlock the disk tray.
bUnscrew the two retaining screws.
cRemove the disk tray.
dDisconnect the disk data cable from the mirrored disk drive.
eDisconnect the power harness from the mirrored disk drive.
fUnfasten the mirrored disk from the disk tray using the Phillips
screwdriver and the screws provided with the disk.
gReinsert the disk tray.
hScrew in the two retaining screws and lock the disk tray in place.
4Restart the system.
5Remove the disk mirroring license from NBX NetSet:
aSelect Operations > Licenses > Remove License.
bIn the Remove License dialog box, select Disk Mirroring License from
the list.
cClick OK.