374 APPENDIX A: INTEGRATING THIRD-PARTY MESSAGING
Add the NBX Third-Party Messaging and Media Driver licenses to your
NBX system:
1Select NBX NetSet > Operations > Licenses > Add License.
2In the License Key field, enter the license key provided by your 3Com
Voice-Authorized Partner.
3Click Apply.
4Add any additional licenses. When you are finished adding licenses, click
OK.
5Reboot the system.
3Com strongly recommends that you back up your licenses each time you
make a license change.
Verify that Auto Discover Telephones is enabled and NBX Messaging is
disabled:
1Select NBX NetSet > System Configuration > System-wide.
2Verify that Auto Discover Telephones is enabled.
3Clear the check box for NBX Messaging.
4Click OK.
Create an NBX Hunt Group for third-party messaging:
1Select NBX NetSet > User Configuration > Hunt Groups > Add.
2Set the following parameters:
■Name — UM Hunt Group (or some similar name)
■Typ e — HuntGroup - Circular.
3Com recommends that you use a circular hunt group rather than a
linear hunt group.
■Extension — Enter the appropriate extension for your hunt group.
■Password — Set the password for this hunt group.
■Logout if no answer — Verify that this check box is empty.
■Users — Select the WAV phones and the ATA ports that are
connected to the third-party messaging system.
■Call Coverage — Set to Voicemail.
3Click OK.