Configuring the NBX 1105 Attendant Console 167
Removing an
Attendant Console
To remove an NBX 1105 Attendant Console from the system:
1Select NBX NetSet > Device Configuration > Attendant Console.
2Select the Attendant Console that you want to remove.
3Click Remove. A dialog box prompts you to confirm the removal.
4Click Yes. The system removes the Attendant Console.
Configuring
Attendant Console
Buttons
This section describes how to configure the buttons on the NBX 1105
Attendant Console. The Attendant Console buttons include:
■50 Access buttons. You can assign each button two settings.
■A Shift button. This button switches between the two settings
allowed for each Access button.
■Four Feature buttons, located below the Access buttons.
Configuring Feature Buttons
To map the Attendant Console Feature Buttons:
1Select NBX NetSet > Device Configuration > Attendant Console.
2Select the Attendant Console for which you want to map Feature
Buttons.
3Click Feature Buttons. The Feature Button Mappings dialog box appears.
4To assign each Feature button, use the drop down list to select the
feature you want to assign to the button. Tab le 30 describes each
feature.
5Click Apply to implement the new mappings.
6Click OK.
Error Count,
Error Code,
Performance Data,
Debug Data,
Actor Data
Advanced diagnostic data for use by technical support
personnel.
Table29 Device Status Fields (continued)
Field Purpose