Adding, Removing, and Modifying Telephones 127
3Optionally, clear all check boxes associated with autodiscovering devices.
4Enable Auto Discover Telephones, and then click Apply.
5Optionally, enable the Auto Add Phones to Call Pickup Group 0 check
box.
Regardless of whether you select this check box, you can change the call
pickup group for any telephone later. See “Call Pickup” on page 264 for
information about Call Pickup Groups.
6Click OK.
7For each telephone that you want to autodiscover:
aRemove the telephone from the packing box.
bConnect the phone to power and the network according to the
instructions in the telephone packing sheet or the NBX Installation
Guide.
cWait until an extension number appears in the telephone’s display
panel.
You can now disconnect the telephone and move it to its destination. The
telephone retains its extension and button mappings.
Adding a Telephone Manually
To add a new telephone manually:
1From the NBX NetSet main menu, click Device Configuration > Telephones.
2Click Add. The Add Telephones dialog box appears.
3Fill in the fields with the appropriate values. See Tabl e 23.
Table23 Add Telephone Dialog Box Fields
Field Description
MAC Address The hardware address assigned at the factory to each device.
To find the MAC Address of an NBX Business Telephone,
look at the label on the bottom of the telephone.
When you type the address, use the format: XX:XX:XX:XX:XX,
where each X represents a hexadecimal digit (0–f).
If you are configuring a pcXset client, the MAC address is the
address of the network interface card in the computer that
hosts the pcXset client.