26
ALARM 1 ENABLE/DISABLE SUBMENU:
Press b5) Scroll though the available selection until ENBL displays to
use Alarm 1.
Press d6) Display shows STRD stored message momentarily and then
advances to ABSo only, if it was changed, otherwise press ato
advance to ABSoAlarm 1 Absolute/Deviation Submenu.
If DSBLAlarm 1 Disabled was selected, all submenus of Alarm
1 Menu will be skipped and meter advances to ALR2 Alarm 2
Menu. If ENBLAlarm 1 Enabled was selected, Output 1 would
be automatically disabled, and reassigned as Alarm 1.
ALARM 1 ABSOLUTE/DEVIATION SUBMENU:
Press d7) Display flashes previous selection. Press bto ABSo
Absolute or _DEV Deviation.
Press d8) Display shows STRD stored message momentarily and then
advances to LTçH only, if it was changed, otherwise press ato
advance to LTçHAlarm 1 Latch/Unlatch Submenu.
Absolute Mode allows Alarm 1 to function independently from Setpoint 1. If the
process being monitored does not change often, then "Absolute" Mode is
recommended.
Deviation Mode allows changes to Setpoint 1 to be made automatically to
Alarm 1. Deviation Mode is typically the ideal mode if the process temperature
changes often. In Deviation Mode, set Alarm 1 a certain number of degrees or
counts away from Setpoint 1 — this relation remains fixed even if Setpoint 1 is
changed.
ALARM 1 LATCH/UNLATCH SUBMENU:
Press d9) Display flashes previous selection. Press bto LTçH Latched
or UNLT Unlatched.
Press d10) Display shows STRD stored message momentarily and then
advances to CT.CL only, if it was changed, otherwise press ato
advance to CT.CL Contact Closure Submenu.
Latched Mode: Relay remains "latched" until reset. To reset already latched
alarm, select Alarm Latch and press Max twice (i.e. Unlatch and then back to
Latch) or from a Run Mode, push dtwice to put the controller in Standby Mode
and then push done more time to return to the Run Mode.
Unlatched Mode: Relay remains latched only as long as the alarm condition is
true.