www.packardbell.com
103
Replacing the coin-cell battery
Tools you need to complete this task:
Screws removed during this task:
• 2 black M2.5×8 (LCD panel hinges - bottom)
• 2 black M2.5×8 (LCD panel hinges - top)
• 13 black M2.5×8 (palm rest
- base side)
• 3 black M2.5×8 (palm rest - top side)
To replace the coin-cell battery:
1Complete the steps in “Preparing the notebook” on page51.
2If the notebook has a wireless card installed, follow step 1 to step 4 in
“Replacing the wireless card” on page 58.
3Remove the keyboard by following the instructions in “Replacing the
keyboard” on page 77 .
4Remove the keyboard cover by following the instructions in “Replacing the
keyboard cover” on page 79.
5Remove the LCD panel assembly by following the instructions in “Replacing
the LCD panel assembly” on page83 .
6Remove the palm rest by following the instructions in “Replacing the palm
rest” on page 87.
7Use a flat blade screw driver or plastic scribe to push and release the
coin-cell battery from the system board.
Flat-blade driver Scribe or non-marring tool
- OR -
Phillips #0 screwdriver