
www.packardbell.com
17Connect the LCD cable to the connector on the new LCD panel and replace the tapes that might be destroyed when removing the LCD cable.
18Turn the LCD on its back and secure the left and right LCD bracket with that screws that were removed in step 12.
19Place the new LCD on the LCD assembly lid and replace the tape remove in step 10.
20Secure the LCD on the LCD assembly lid by replacing the screws that were remove in step 9.
21Reconnect the webcam cable.
22Replace the inverter board by following the instructions in “Replacing the inverter board” on page 119.
23Replace the LCD front panel by following the instructions in “Replacing the LCD front panel” on page 116.
24Reinstall the LCD panel assembly by following the instructions in “Replacing the LCD panel assembly” on page 83.
25Reinstall the keyboard cover by following the instructions in “Replacing the keyboard cover” procedure on page 79.
26Reinstall the keyboard by following the instructions in “Replacing the keyboard” on page 77.
27If you have disconnected any wireless antennas, reconnect them now.
28Replace the bay cover, then tighten the cover screws.