www.packardbell.com
83
Replacing the LCD panel assembly
Tools you need to complete this task:
Screws removed during this task:
• 2 black M2.5×8 (LCD panel hinges - bottom)
• 2 black M2.5×8 (LCD panel hinges - top)
To replace the LCD panel assembly:
1Complete the steps in “Preparing the notebook” on page51.
2If the notebook has a wireless card installed, follow step 1 to step 4 in
“Replacing the wireless card” on page 58.
If there’s no wireless card installed, proceed to step6.
3Remove the keyboard by following the instructions in “Replacing the
keyboard” on page 77 .
4Remove the keyboard cover by following the instruction in “Replacing the
keyboard cover” on page 79.
5Turn the notebook over so the base is facing up.
6Remove the base screws that secure the LCD panel hinges.
7Turn the notebook over again so the palm rest is facing up.
Flat-blade driver Scribe or non-marring tool
- OR -
Phillips #0 screwdriver