www.packardbell.com
21Remove the one screw securing the system board to the base panel.
22Carefully lift the right side of the system board and slide it out of the base panel.
Note
A circuit board that is >10 cm2 has been highlighted with a yellow rectangle as shown in the above image. Follow the local regulations for disposing this type of circuit board.
23Replace the new system board into the base panel.
24Secure the new system board with the screws that was remove in step 21.
25Reconnect the subwoofer cable to the FRONT1 connector on the system board.
26Replace the
27Replace the modem board by following the instructions in “Replacing the modem board” on page 101.
28Replace the Bluetooth module by following the instructions in “Replacing the Bluetooth module” on page 99.
