CHAPTER 2: System utilities
Parameter | Description | Format/Options |
|
|
|
Quiet Boot | Enables or disables the Quiet Boot | Disabled |
| function. | Enabled |
| When enabled, BIOS setup is in graphical |
|
| mode and displays only the computer |
|
| brand logo during POST and while booting. |
|
| When disabled, BIOS setup is in |
|
| conventional text mode and displays the |
|
| system Summary Screen. |
|
|
|
|
Network Boot | When enabled, a remote host with |
| appropriate boot image can boot this |
| computer. (only works with an Ethernet |
| device.) |
Disabled
Enabled
F12 Boot Menu | Enables or disables the Boot menu during | Disabled |
| POST. | Enabled |
|
|
|
D2D Recovery | Enables or disables the D2D Recovery | Disabled |
| function. This function allows the user to | Enabled |
| create a hidden partition on the hard drive |
|
| to store the operation system. User can |
|
| then use this partition to restore the system |
|
| to factory defaults by pressing the Alt+F10 |
|
| keys during system |
|
|
|
|
SATA Mode | Select the SATA controller operating mode. | AHCI |
| When set to AHCI (Advanced Host | IDE |
| Controller Interface), the SATA controller |
|
| enables its AHCI and RAID features when |
|
| the computer boots up. |
|
| When set to IDE, the SATA controller |
|
| disables its AHCI and RAID functions when |
|
| the computer boots up. |
|
| Note: If you do not intend to use the AHCI |
|
| or RAID features set this parameter to IDE |
|
| to speed up the |
|
|
|
|
34