Acer DT85 Replacing the VGA board (for discrete models)

www.packardbell.com
75
Replacing the VGA board (for discrete
models)
Tools you need to complete this task:
Screws removed during this task:
•2 black M2×4 (VGA board)
To replace the VGA board (for discrete models):
1Complete the steps in “Preparing the notebook” on page51.
2Complete the steps in “Removing the bay cover” on page55.
3Remove the thermal module by following the instructions in “Replacing the
thermal module” on page 70.
4Remove the VGA board screws.
Flat-blade driver Scribe or non-marring tool
- OR -
Phillips #0 screwdriver