Reinstall the LCD panel assembly by following the instructions in “Replacing the LCD panel assembly” on page 83.
Reinstall the palm rest by following the instructions in “Replacing the palm rest” on page 87.
Insert the touchpad cable to the touchpad board cable connector, and then close the clip to lock the cable in place.
Observing the same orientation as the old touchpad board, secure the new board on the palm rest.
13
14
15
16
17 Reinstall the keyboard cover by following the instructions in “Replacing the keyboard cover” procedure on page 79.
Remove the touchpad board from the palm rest.
Note
A circuit board that is >10 cm2 has been highlighted with a yellow rectangle as shown in the above image. Follow the local regulations for disposing this type of circuit board.
12
CHAPTER 3: Replacing notebook components
11 Insert a small flat-blade screwdriver or non-marring scribe between the touchpad board and the palm rest’s underside, and carefully pry the board loose.
92
