CHAPTER 3: Replacing notebook components
Replacing the webcam
Tools you need to complete this task:
- OR - | Scribe or |
Phillips #0 screwdriver
Screws removed during this task:
•
2 black M2.5×8 (LCD panel hinges - bottom)
•
2 black M2.5×8 (LCD panel hinges - top)
• | 13 M2.5×8 black (palm rest |
-base side)
•
3 black M2.5×8 (palm rest - top side)
To replace the webcam:
1Complete the steps in “Preparing the notebook” on page 51.
2If the notebook has a wireless card installed, follow step 1 to step 4 in “Replacing the wireless card” on page 58.
3Remove the keyboard by following the instructions in “Replacing the keyboard” on page 77 .
4Remove the keyboard cover by following the instructions in “Replacing the keyboard cover” on page 79.
5Remove the LCD panel assembly by following the instructions in “Replacing the LCD panel assembly” on page 83.
6Remove the LCD front panel by following step 6 to step 8 in “Replacing the LCD front panel” on page 116.
7Carefully pry loose the webcam from the LCD panel assembly lid.
8Tape the new webcam to the LCD panel assembly lid by using a
