Acer DT85 manual F10

www.packardbell.com

Security

Use the Security menu option to set system passwords to protect your computer from unauthorized use.

			Phoenix SecureCore(tm) Setup					Utility
Information			Main	Security			Boot		Exit
									Item	Specific Help
Supervisor Password is:					Clear
User	Password		is:		Clear
HDD	Password		is:		Clear				Supervisor Password
									controls	access of	the
Set	Supervisor		Password		[	Enter	]		whole setup utility.
Set	User	Password			[Enter]				It can be used to		boot
Set	HDD	Password			[Enter]				up when	Password	on
									boot is	enabled.
Password		on Boot:			[Disabled]

	F1	Help	Select	Item	-/+	Change	Values	F9	Setup	Defaults
	Esc	Exit	Select	Menu	Enter	Select	Sub-Menu	F10	Save	and Exit
.
			Parameter		Description						Option
			Supervisor		Displays the supervisor password status.						Clear
			Password Is								Set
			User Password Is		Displays the user password status.						Clear
											Set
			HDD Password Is		Displays the hard drive password status.						Clear
											Set
			Set Supervisor		Press Enter to set a supervisor password. When set, this password
			Password		will allow the user to access and change all settings in the Setup
					Utility.
			Set User Password		Press Enter to set a user password. When set, this password will
					restrict a user’s access to the Setup menus. Only the following
					menus will be accessible:

•System Time and System Date

•All Exit menu options excluding Load Setup Defaults

Note: A supervisor password must first be set before creating a user password.

If Password on Boot is enabled, the user must enter the user password each time the notebook is turned on or wakes from Sleep.

35