www.packardbell.com
12Disconnect the touchpad board and touchpad button board cables from TP335 and FP2 connectors.
13Carefully pry loose the palm rest from the system and lift the palm rest from the system.
14Place the new palm rest assembly on top of the base enclosure and press it down on all sides until it snaps into place.
15Reconnect the speaker cable, touchpad board cable, touchpad button board cable, and
16Secure the palm rest assembly with the screws removed in steps 7 and 9.
17Reinstall the LCD panel assembly by following the instructions in “Replacing the LCD panel assembly” on page 83.
18Reinstall the keyboard cover by following the instructions in “Replacing the keyboard cover” procedure on page 79.
19Reinstall the keyboard by following the instructions in “Replacing the keyboard” on page 77.
20If you have disconnected any wireless antennas, reconnect them now.
21Replace the bay cover, then tighten the cover screws.
22Reinstall the battery.
89
