![](/images/new-backgrounds/1272511/272511183x1.webp)
CHAPTER 3: Replacing notebook components
14Position the new LCD panel assembly on the notebook, and then secure it with the hinge screws removed in step 12.
15If the notebook has a wireless card installed, proceed to step 17 to arrange the antenna cables.
16If there’s no wireless card installed, proceed to step 18 .
17Refer to the antenna cable routing note made on step 10 and secure the antenna cables to the palm rest before pulling the ends downward to the notebook base.
18Arrange the LCD and microphone cables on the palm rest and reconnect them to their system board connectors.
19Close the LCD panel and turn the notebook over so the base is facing up.
20If the notebook has a wireless card installed, reconnect the antenna cables and then reinstall the bay cover.
21Return the base hinge screws removed in step 6.
22Turn the notebook over so the palm rest is facing up.
23Reinstall the keyboard cover by following the instructions in “Replacing the keyboard cover” procedure on page 79.
24Reinstall the keyboard by following the instructions in “Replacing the keyboard” on page 77.
25Reinstall the battery.
86