www.packardbell.com
Note:
The LCD front panel is glued to the LCD panel by a
7Turn over the LCD front panel as shown.
8Remove the microphone from the LCD front panel.
9Replace the microphone and place the new front panel on top of the LCD assembly lid.
10Press the front panel on all sides until it snaps into place.
Make sure that there is no gap the between the front panel and the LCD assembly lid.
11Reinstall the LCD panel assembly by following the instructions in “Replacing the LCD panel assembly” on page 83.
12Reinstall the keyboard cover by following the instructions in “Replacing the keyboard cover” procedure on page 79.
13Reinstall the keyboard by following the instructions in “Replacing the keyboard” on page 77.
14If you have disconnected any wireless antennas, reconnect them now.
15Replace the bay cover, then tighten the cover screws.
