3-47
Function Reference
New GPIB Address (Remote Setup Panel)
New GPIB Address (Remote Setup Panel)Allows you to enter a new GPIB address. To change the address, use the
numeric entry keys, step keys, or knob. Press the Defau lts sof tkey t o r eset the
address to the factory preset default, 23.
Key Path System > More System Functions > GPIB & Network Setup > GPIB Address
Related Functions Current GPIB Address
Next Peak Down ↓
Places the active marker on the next highest peak down from the current
marker amplitude. This peak must meet the peak excursion and threshold cri-
teria. If the specified marker is off, it will be turned on and placed at the cen-
ter wavelength. The search for the next maximum will reference that point.
Key Path Markers > More Marker Functions > Marker Search Menu > Next Peak ↓
Remote
Commands :CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:MAXimum:NEXT
Next Peak Left ←
Places the marker on the next peak located at a lower X-axis value (usually
wavelength) than the current marker position. This peak must meet the peak
excursion and threshold criteria. If the specifie d marker is off , it wi ll be tu rned
on and placed at the center wavelength or frequency.
Key Path Markers > More Marker Functions > Marker Search Menu >Next P eak ←
Remote
Commands :CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:MAXimum:LEFT