6-6
Maintenance
Printer Head Cleaning Procedure
CAUTION Avoid dropping the coin or screwdriver, used to open the printer door, into the
printer assembly.
4Lift up the paper latch as shown in the following diagram, and remove the
paper.
5Unscrew the retaining screw that secures the sheet-metal cover that protects
the printer head from electrostatic discharge. Slide the shee t-metal cover
towards the retaining screw and then lift it straight up to remove.
6Lift the printer head lever to the vertical positi on. Then, tilt the lever towards
the instrument’s rear panel to rotate the printer head up.