3-69
Function Reference
Recall Menu
Recall Menu
Accesses the Recall Setup panel for the following settings:
•Recall (all measurement data or trace data only)
•Recall From (recall from a floppy disk or from the internal drive
•Network File Share 1|2|3|4
•Network File Path
Note To insure accurate measurements, a wavelength calibration should be
performed each time measurement data is recalled from memory.
Key Path Save/Recall > Recall Menu
Remote
Commands MMEMory:LOAD:TRACe
Reference Level
Specifies the reference level value, the maximum expecte d po w e r to be mea-
sured, at the reference level position. The reference leve l p osit ion is in di cate d
on the display by a dashed green line and the REF annotation on the display.
The default position is one major graticule division from the top of the display.
The reference level is entered in dBm. Use the Amplitude Setup panel to
change the reference level position. See “Reference Level Position ( Amplitude
Setup Panel)” on page3-70
Key Path Amplitude > Reference Level
Related Functions Amplitude Setup (Reference Level Position), Scale/Div
Remote
Commands DISPlay:WINDow:TRACe:Y:SCALe:RLEVel