PPP-Peer | Airlink X EV-DO specification

IP Manager and DNS

Note: If you will be using your Raven X to communicate with another AirLink modem and both are using IP Manager to translate dynamic IP addresses to domain names, it is recommended that you set *DNSUSER to the IP address for IP Manager. IP Manager’s updates occur more frequently than Verizon’s DNS servers decreasing the time between IP address change and address resolution. Likewise, if your Raven X routinely needs to contact another modem or device with a Dynamic DNS domain and that modem or device frequently changes its IP address, you may need to set *DNSUPDATE for frequent updates.

PPP-Peer

The Raven X uses the unqualified domain name of “ppp-peer” when it is in PPP or SLIP address mode to resolve the address of the device or computer connected via PPP or SLIP address. If the Raven X is not in PPP or SLIP address mode, “ppp-peer” will resolve to 0.0.0.0.

Raven X EV-DO for Verizon - User Guide, version 2.34

16

Image 22

Airlink X EV-DO manual PPP-Peer

Contents

Raven X EV-DO Version 2.34 April Raven X EV-DO for Verizon User Guide, version Contents Modbus/BSAP Configuration Contents Simple Network Management Protocol Snmp Frequently Asked Questions and Technical Support Introduction to Raven X EV-DO EV-DO Overview Introduction to Raven X EV-DO Establishing an Internet ConnectionSteps of a connection Using Your Raven X to Connect to the Internet Dynamic vs. Static IP Addresses Backup connection to the Internet Common Uses for the Raven Activating the Raven Quick Start Guide and Setup WizardAutomatic Activation Activating the Raven X using AT Commands Activating the Raven Utilities for the Raven AceView Wireless Ace Utilities for the Raven AceNet AceNet Modem Doctor Modem Doctor IP Manager and DNS Reasons to contact the modem and/or the connected device Fully Qualified Domain Name IP Manager and DNS Wireless Ace Dynamic IP Dynamic Names Restrictions for Modem Name Data Usage for IP Manager Server UpdatesEairlink.com DNS Using Names Instead of IP addresses Configuring DNS PPP-Peer Data Communication and Host Modes AT Mode Data Communication and Host Modes PassThru Mode Wireless Ace PassThru Wireless Ace Telnet Configuration TelnetMode PPP Mode Wireless Ace PPP/Ethernet UDP Pad Slip ModeUDP Auto Answer UDP Multicast Mode Reliable UDP TCP PAD Hybrid Modes Public and Private Mode Internal Dhcp Server Dhcp and Routing Dhcp in the Raven X using Public ModeAirLink Modem as a Gateway PPPoE with Dhcp Configuring Keepalive Keepalive Data usage using Keepalive Telemetry Modbus/BSAP ConfigurationModbus Overview Remote Terminal Unit RTU Programmable Logic Controller PLC Modbus/BSAP ConfigurationSupervisory Control and Data Acquisition Scada Modbus TCP/IP Configuring the Raven Configuring the Raven X at the Polling Host for Modbus on Wireless Ace Device Port Wireless Ace Addr List Dynamic IP Configuring the Remote Modems for Modbus with UDP Wireless Ace UDP Power-up Mode Dynamic IPs Raven mounted in an enclosure with an RTU Power Connections Hardware Installation Connecting the Antennas Raven X Indicator Lights Connecting PowerConnecting the Raven X to a computer or other device Hardware Installation Monitoring Power-In Voltage and Internal Temperature Light Patterns Wireless Ace *POWERIN and *BOARDTEMP Modem Placement Built in Mounting Tabs for Raven Installing a Raven with an RTU Modem Placement Raven mounted in an enclosure with RTU Physical Characteristics Specifications for the Raven X EV-DOData Services & RF Features Power consumption Specifications for the Raven X EV-DOPower Management Environmental AT Commands Using Wireless Ace AT Commands Wireless Ace Save / Load a Template Using Telnet Terminal Emulation StartAll ProgramsAccessoriesCommunicationsHyperTerminal HyperTerminal Comport Setting Direct Serial Connection Using AT Commands with a Terminal Application HyperTerminal Comport Settings AT Command Listing Symbols AT Commands Information and Status Information and Status Autoprl ETHMAC? Prlstatus Bad Password Count Misc Miscellaneous AT Commands Misc MiscellaneousOPRG=n NETALLOWZEROIP=n DPORT=nHOSTPAP=n NETPW=pw STATICIP=d.d.d.d PRLDIAL=nSTATUSCHK=n Serial AT Commands Serial+++ Dmethodd.d.d.d/ppppp or Dmethod@name/ppppp S23=speed,databitsparitystop bits Set DTR mode PPPNOCARRIER=n S7=n AT Commands TCPS0=n S60=n TCPT=n S221=nTCPS=n ENQ=n HOR=n AT Commands UDPAIP=n MDhh DU=n S82=nS83=n UALL=n UDPLAST=n DNSn AT Commands DNSDNSUPDATE=n DNSUSER=d.d.d.d DOMAIN=name AT Commands Dynamic IPIPMANAGERn=name IPMGRKEYn=key IPMGRUPDATEn=mMODEMNAME=name AT Commands PPP/Ethernet PPP/Ethernet HOSTPW=string HOSTPRIVMODE=nHOSTUID=string AT Commands PassThru PassThru \APASSTHRU AT Commands Smtp including SMS Smtp including SMS SMTPSEND=emailbody NETSMS2EMAIL=n DAE=n AT Commands OtherOther DATZ=n MSCIUPDPERIOD=n IPPING=nMSCIUPDADDR=name/port NETWDOG=n SNMPTRAPDEST=host/port TELNETTIMEOUT=nSNMPSECLVL=n SNTP=n Friends AT Commands FriendsFM=n 255 = allow any number AT Commands Logging Logging DBGPPPLVL=n AT Commands Telemetry and Addr List Address List Telemetry and Addr List Address List IPL=n MVLEN=n MVOPT=n MVMSK=hhMVOFF=n MVTYP=n Commands in other groups associtated with Telemetry MDn Destination Address Destination Port and *DPORT $QCMIP=n AT Commands CDMA/EV-DO+CTA=n ~NAMLCK=nnnnnn EVDODIVERSITY=n PROVISION=MSL,MDN/MIN,SID,NID Nam=0 Management Information Base MIB Raven X Snmp ConfigurationSnmp Overview Snmp Traps Listening Port User Name and PasswordSimple Network Management Protocol Snmp Security Level Trap Destination Snmp MIB Definition for AirLinkCommunity String Imports Simple Network Management Protocol Snmp Simple Network Management Protocol Snmp 100 101 102 PPPoE Point to Point Protocol over Ethernet PPPoE PPP over Ethernet ConfigurationConfiguring your Raven X for PPPoE 103 PPPoE Point to Point Protocol over Ethernet 104 Configuring a PPPoE Connection in Windows 105 106 Show All Connections 107 108 PPPoE 109 Select Finish to exit the Network Connection Wizard 110 Connect Connecting to the Internet with PPPoE 111 Configuring your router for PPPoE with the Raven 112 Windows Dial-up Networking DUN Installing the Modem Driver in Microsoft Windows113 Windows Dial-up Networking DUN 114 115 Modem Driver Dial-Up Networking PPP Configuration for Microsoft Windows 116 117 118 119 Phone Number 120 Modem Configuration 121 Making a DUN Connection Establishing a DUN Connection using AceView122 Establishing a DUN Connection with Windows Networking Windows 98 and Windows NT123 124 Warranty Terms Warranty Terms and Conditions125 Remedy Warranty ConditionsWarranty Terms and Conditions 126 General Conditions 127 FAQ Topics Frequently Asked Questions and Technical Support128 What is the Proper RF Coverage for my Raven X? Frequently Asked Questions and Technical SupportWhat is RSSI? Why is the Rssi for my Raven X negative? What Type of Antenna is Best for my Raven X? Can I use a portable battery to power my Raven X ? What do I need to power my Raven X ?130 Raven X’s IP Addresses and Local Networking What is the difference between Private and Public mode?131 132 Software Required Does EV-DO provide any security? Security for the Raven133 Wireless Ace Reset Password 134 Activation Registering on the Verizon Network 135 Using Aleos 136 Prefered Roaming List PRL What is a PRL?How can I update the PRL Prefered Roaming List? 137 Terminal Connection AT Commands 138 AirLink Support Web Site AirLink Documentation and Guides AirLink Technical SupportAirLink Technical Support Contacting Technical Support