Airlink X EV-DO manual S221=n, TCPS=n, TCPT=n, ENQ=n

AT Commands: TCP

S221=n

Connect Delay:

n= 0 - 255

Number of seconds to delay the “CONNECT' response upon establishing a TCP connection.

OR

Number of tenths of seconds to delay before outputting ENQ on the serial port after the CON- NECT when the ENQ feature is enabled (see *ENQ).

TCPS=n

TCP connection time-out (TCPS) units. Specifies a time interval upon which if there is no in or outbound traffic through a TCP connection, the connection will be terminated.

n=minutes (TCPS=0) or seconds (TCPS=1)

TCPT=n

TCP connection time-out (TCPT) units. Specifies a time interval upon which if there is no in or outbound traffic through a TCP connection, the connection will be terminated.

n=minutes (TCPT=0) or seconds (TCPT=1)

Note: This value only affects the TCP connection in TCP PAD mode.

*ENQ=n

Outputs an ENQ [0x05] after the TCP CONNECT delayed by the Delay Connect Response time (S221).

n=0 : Disabled (Default).

n=1 : Enables ENQ on CONNECT.

Raven X EV-DO for Verizon - User Guide, version 2.34 66