Restrictions for Modem Name, Eairlink.com | Airlink X EV-DO manual

IP Manager and DNS

*MODEMNAME: The name you want for the modem.

*DOMAIN: The domain name to be used by the modem.

*IPMANAGER1 and *IPMANAGER2: The IP address or domain name of the dynamic DNS server which is running IP Manager.

Note: To use the name here instead of the IP, you need to have DNS set up in your

Raven X (page 15).

*IPMGRUPDATE1 and *IPMGRUPDATE2: How often, in minutes, you want the address sent to IP Manager. If this is set to zero, the modem will only send an update if the IP address changes (example, if your Raven X modem is reset or is assigned a different IP address).

*IPMGRKEY1 and *IPMGRKEY2: User defined password key which is used instead of Air- Link secret key when using an IP Manager server other than the one provided by AirLink.

Restrictions for Modem Name

For the Modem Name, you should use something which is unique but also easy to remember. Your company name or the intended function of the modem are recommended. If you have more than one modem and want to name them the same, you can append a number for each. Since it is an Internet domain name, there are some restrictions for the name.

•Must begin with a letter or number

•Can include a hyphen (-)

•Cannot contain spaces

•Must be no longer than 20 characters total

Data Usage for IP Manager Server Updates

The IP Manager update is a small packet sent to the server with a response sent back to the modem. If you have *IPMGRUPDATE1 or *IPMGRUPDATE2 set to any number but zero, the modem will send the update not only when it receives a new IP address but at the time interval as well. The data traffic could be billed by your carrier.

Each update is a total of 68 bytes from the modem with a 50 byte total response from the server for a round trip update of 118 bytes.

interval	total bytes per	interval	total bytes per
(minutes)	day (24 hours)	(minutes)	day (24 hours)
10	16992 bytes	60	2832 bytes
30	5664 bytes	500	339.84 bytes

Eairlink.com

As a service, Airlink maintains a IP Manager servers which can be used for any AirLink modem.

•*DOMAIN: eairlink.com

•*IPMANAGER1 : edns2.eairlink.com

•*IPMANAGER2 : eairlink.com

Raven X EV-DO for Verizon - User Guide, version 2.34

14

Image 20

Airlink X EV-DO manual Restrictions for Modem Name, Data Usage for IP Manager Server Updates, Eairlink.com

Contents

Raven X EV-DO Version 2.34 April Raven X EV-DO for Verizon User Guide, version Contents Modbus/BSAP Configuration Contents Simple Network Management Protocol Snmp Frequently Asked Questions and Technical Support Introduction to Raven X EV-DO EV-DO Overview Steps of a connection Establishing an Internet ConnectionIntroduction to Raven X EV-DO Using Your Raven X to Connect to the Internet Dynamic vs. Static IP Addresses Backup connection to the Internet Common Uses for the Raven Automatic Activation Quick Start Guide and Setup WizardActivating the Raven Activating the Raven X using AT Commands Activating the Raven Utilities for the Raven AceView Wireless Ace Utilities for the Raven AceNet AceNet Modem Doctor Modem Doctor IP Manager and DNS Reasons to contact the modem and/or the connected device Fully Qualified Domain Name IP Manager and DNS Wireless Ace Dynamic IP Dynamic Names Eairlink.com Data Usage for IP Manager Server UpdatesRestrictions for Modem Name DNS Using Names Instead of IP addresses Configuring DNS PPP-Peer Data Communication and Host Modes AT Mode Data Communication and Host Modes PassThru Mode Wireless Ace PassThru Wireless Ace Telnet Configuration TelnetMode PPP Mode Wireless Ace PPP/Ethernet UDP Auto Answer Slip ModeUDP Pad UDP Multicast Mode Reliable UDP TCP PAD Hybrid Modes Public and Private Mode Internal Dhcp Server Dhcp in the Raven X using Public Mode AirLink Modem as a GatewayDhcp and Routing PPPoE with Dhcp Configuring Keepalive Keepalive Data usage using Keepalive Modbus/BSAP Configuration Modbus OverviewTelemetry Remote Terminal Unit RTU Modbus/BSAP Configuration Supervisory Control and Data Acquisition ScadaProgrammable Logic Controller PLC Modbus TCP/IP Configuring the Raven Configuring the Raven X at the Polling Host for Modbus on Wireless Ace Device Port Wireless Ace Addr List Dynamic IP Configuring the Remote Modems for Modbus with UDP Wireless Ace UDP Power-up Mode Dynamic IPs Raven mounted in an enclosure with an RTU Power Connections Hardware Installation Connecting the Antennas Connecting Power Connecting the Raven X to a computer or other deviceRaven X Indicator Lights Hardware Installation Monitoring Power-In Voltage and Internal Temperature Light Patterns Wireless Ace *POWERIN and *BOARDTEMP Modem Placement Built in Mounting Tabs for Raven Installing a Raven with an RTU Modem Placement Raven mounted in an enclosure with RTU Data Services & RF Features Specifications for the Raven X EV-DOPhysical Characteristics Specifications for the Raven X EV-DO Power ManagementPower consumption Environmental AT Commands Using Wireless Ace AT Commands Wireless Ace Save / Load a Template Using Telnet Terminal Emulation StartAll ProgramsAccessoriesCommunicationsHyperTerminal HyperTerminal Comport Setting Direct Serial Connection Using AT Commands with a Terminal Application HyperTerminal Comport Settings AT Command Listing Symbols AT Commands Information and Status Information and Status Autoprl ETHMAC? Prlstatus Bad Password Count OPRG=n AT Commands Misc MiscellaneousMisc Miscellaneous DPORT=n HOSTPAP=nNETALLOWZEROIP=n NETPW=pw STATUSCHK=n PRLDIAL=nSTATICIP=d.d.d.d +++ AT Commands SerialSerial Dmethodd.d.d.d/ppppp or Dmethod@name/ppppp S23=speed,databitsparitystop bits Set DTR mode PPPNOCARRIER=n AT Commands TCP S0=nS7=n S60=n S221=n TCPS=nTCPT=n ENQ=n AT Commands UDP AIP=nHOR=n MDhh S82=n S83=nDU=n UALL=n UDPLAST=n AT Commands DNS DNSUPDATE=nDNSn DNSUSER=d.d.d.d IPMANAGERn=name AT Commands Dynamic IPDOMAIN=name MODEMNAME=name IPMGRUPDATEn=mIPMGRKEYn=key AT Commands PPP/Ethernet PPP/Ethernet HOSTUID=string HOSTPRIVMODE=nHOSTPW=string AT Commands PassThru PassThru \APASSTHRU AT Commands Smtp including SMS Smtp including SMS SMTPSEND=emailbody NETSMS2EMAIL=n AT Commands Other OtherDAE=n DATZ=n IPPING=n MSCIUPDADDR=name/portMSCIUPDPERIOD=n NETWDOG=n TELNETTIMEOUT=n SNMPSECLVL=nSNMPTRAPDEST=host/port SNTP=n FM=n AT Commands FriendsFriends 255 = allow any number AT Commands Logging Logging DBGPPPLVL=n AT Commands Telemetry and Addr List Address List Telemetry and Addr List Address List IPL=n MVLEN=n MVMSK=hh MVOFF=nMVOPT=n MVTYP=n Commands in other groups associtated with Telemetry MDn Destination Address Destination Port and *DPORT AT Commands CDMA/EV-DO +CTA=n$QCMIP=n ~NAMLCK=nnnnnn EVDODIVERSITY=n PROVISION=MSL,MDN/MIN,SID,NID Nam=0 Raven X Snmp Configuration Snmp OverviewManagement Information Base MIB Snmp Traps User Name and Password Simple Network Management Protocol SnmpListening Port Security Level Community String Snmp MIB Definition for AirLinkTrap Destination Imports Simple Network Management Protocol Snmp Simple Network Management Protocol Snmp 100 101 102 PPPoE PPP over Ethernet Configuration Configuring your Raven X for PPPoEPPPoE Point to Point Protocol over Ethernet 103 PPPoE Point to Point Protocol over Ethernet 104 Configuring a PPPoE Connection in Windows 105 106 Show All Connections 107 108 PPPoE 109 Select Finish to exit the Network Connection Wizard 110 Connect Connecting to the Internet with PPPoE 111 Configuring your router for PPPoE with the Raven 112 113 Installing the Modem Driver in Microsoft WindowsWindows Dial-up Networking DUN Windows Dial-up Networking DUN 114 115 Modem Driver Dial-Up Networking PPP Configuration for Microsoft Windows 116 117 118 119 Phone Number 120 Modem Configuration 121 122 Establishing a DUN Connection using AceViewMaking a DUN Connection 123 Windows 98 and Windows NTEstablishing a DUN Connection with Windows Networking 124 125 Warranty Terms and ConditionsWarranty Terms Warranty Conditions Warranty Terms and ConditionsRemedy 126 General Conditions 127 128 Frequently Asked Questions and Technical SupportFAQ Topics Frequently Asked Questions and Technical Support What is RSSI? Why is the Rssi for my Raven X negative?What is the Proper RF Coverage for my Raven X? What Type of Antenna is Best for my Raven X? 130 What do I need to power my Raven X ?Can I use a portable battery to power my Raven X ? 131 What is the difference between Private and Public mode?Raven X’s IP Addresses and Local Networking 132 Software Required 133 Security for the RavenDoes EV-DO provide any security? Wireless Ace Reset Password 134 Activation Registering on the Verizon Network 135 Using Aleos 136 What is a PRL? How can I update the PRL Prefered Roaming List?Prefered Roaming List PRL 137 Terminal Connection AT Commands 138 AirLink Technical Support AirLink Technical SupportAirLink Support Web Site AirLink Documentation and Guides Contacting Technical Support