Hardware Installation
FIGURE 2. Raven X indicator lights
Network - Indicates a successful connection to the cellular network with an IP address given and a channel acquired.
Signal - Light shows the strength of the signal and may be nearly solid (strong signal) or flashing (weaker signal). A slow flash indicates a very weak signal.
Activity - Lights will flash as data is transferred to and from the Raven X on the remote network.
Service - Indicates when the connection is
Power- Indicates the power adapter is connected and there is power getting to the modem. .
The Reset button has two funtions. If it is quickly depressed and released, the modem will simply power cycle the internal hardware. If, however, the reset is depressed and held for several sec- onds (count 10 slowly), the ALEOS configuration settings will return to the factory defaults.
Caution: If you reset the modem configuration using the reset button, you may need to reactivate your Raven X with Verizon.
Light Patterns
The LEDs on the front of the modem will respond in different patterns to indicate modem states.
•Normal - Each LED, mentioned above, lit as applicable.
•Start up - The LEDs will cycle from left to right.
•Passthru - Network and Single LEDs will blink in tandem. The Activity LED will blink when transmitting or receiving data.
•Configuration Reset - The LEDs will cycle left to right and then right to left 4 times.
•Authenication Failure - The Network, Signal, and Activity LEDs blink every 2 seconds.
•Data Retry - The Network, Signal, and Activity LEDs blink every 3 seconds.
•SOS - The Network and Service LEDs will blink alternate to each other.
Trouble Indicators (combined with any of the above)
•Invalid MAC Address or Ethernet Initiation Fail - The Service LED will blink.
Monitoring Power-In Voltage and Internal Temperature
The current status of the
Raven X | 40 |
