Chapter 7: Cabling the Stacking Ports

6.Connect the fiber optic cable to the transceiver, as shown in Figure 59 on page 100. The connector on the cable should fit snugly into the port, and the tab should lock the connector into place.

SFP+

S1

/27

 

 

 

CON

 

S2/2

 

SO

LE

8

 

2691

Figure 59. Connecting the Fiber Optic Cable to the Stacking Transceiver

7.Repeat this procedure if the switch is to have two stacking transceivers.

8.Repeat this procedure on the other switches of the stack to install their stacking transceivers. The connections must crossover such that a transceiver in slot 1 connects to a transceiver in slot 2.

9.After you connect the stacking cables to all the switches, go to Chapter 8, “Powering On the Stack” on page 101.

100

Page 100
Image 100
Allied Telesis AT-IX5-28GPX manual 100