Allied Telesis AT-IX5-28GPX manual Monitoring the Initialization Processes

IX5-28GPX Installation Guide

Monitoring the Initialization Processes

It takes about thirty seconds for the switch to initialize its management software programs and features, and load the default configuration. You may monitor the progress of the initialization process by watching the switch ID LED. It displays the number “8” for about the first 15 seconds and then displays the number “1.”

You may also monitor the bootup sequence by connecting a terminal or computer that has a terminal emulator program, to the Console port on the master switch. You will see the messages in Figure 31 here to Figure 33 on page 75.

Bootloader 2.0.15 loaded

Press <Ctrl+B> for the Boot Menu

Reading filesystem...
Loading flash:x510-5.4.3-3.7.rel...
Verifying release... OK
Booting...
Starting base/first...				[	OK	]
Mounting virtual filesystems...				[	OK	]
	______________		____
	/\ \	/ /______\
/	\ \_	__/ / ______
/	\	/	______
/	\ \	/ /	\ ____ /
/______/\____\ \/ /____________/
Allied Telesis Inc.
AlliedWare Plus (TM) v5.4.2A
Current release filename: x510-5.4.3-3.7.rel
Original release filename: x510-5.4.3-3.7.rel
Built: 08-Oct-2013 10:43:42 NZDT 2013 by: maker@maker04-build
Mounting static filesystems...				[	OK	]
Checking flash filesystem...				[	OK	]
Mounting flash filesystem...				[	OK	]
Checking NVS filesystem...				[	OK	]
Mounting NVS filesystem...				[	OK	]
Starting base/dbus...				[	OK	]
Starting base/syslog...				[	OK	]

73