Switch Initialization Messages | Allied Telesis AT-IX5-28GPX

Chapter 4: Installing the Switch and its Power Supplies

Figure 31. Switch Initialization Messages

Starting base/loopback...	[	OK	]
Starting base/poe_done...	[	OK	]
Starting base/sysctl...	[	OK	]
Received event poefw.done
Starting base/portmapper...	[	OK	]
Received event syslog.done
Starting base/reboot-stability...	[	OK	]
Starting base/autofs-card...	[	OK	]
Checking system reboot stability...	[	OK	]
Starting base/cron...	[	OK	]
Starting base/appmond...	[	OK	]
Starting hardware/openhpi...	[	OK	]
Starting hardware/timeout...	[	OK	]
Starting base/inet...	[	OK	]
Starting base/modules...	[	OK	]
Received event modules.done
Received event board.inserted
Received event hardware.done
Starting network/startup...	[	OK	]
Starting network/stackd...	[	OK	]
Starting network/election.timeout...	[	OK	]
Received event network.enabled

Initializing HA processes:

openhpid, hostd, cntrd, nsm, auth, epsr, hsl imiproxyd, irdpd, lldpd, loopprot, mstp rmon, sflowd, udldd, vrrpd, imi

lacp, pdmd

Received event network.initialized

03:44:11 awplus-1 VCS[826]: No neighboring members found, unit may be in a stand alone configuration

03:44:11 awplus-1 VCS[826]: Startup speed can be improved by adding 'no stack 1 enable' to configuration

Received event vcs.elected-master

03:44:11 awplus-1 VCS[826]: Member 1 (0015.774f.ed30) has become the Active Master