Allied Telesis AT-IX5-28GPX manual Removing the Dust Cover from a Stacking Transceiver

IX5-28GPX Installation Guide

4.Remove the dust cover from the transceiver, as shown in Figure 57 on page 99.

25
SFP+	S1	/2
			7
26
	S2/2			SO	LE
			8

2689

Figure 57. Removing the Dust Cover from a Stacking Transceiver

5.Verify the position of the handle on the transceiver. If the transceiver is in the S1 slot, the handle should be in the upright position, as shown in Figure 58. If the transceiver is in the S2 slot, the handle should be in

the down position.

25

SFP+ S1 /27

26

S2/2 8

SOLE

2690

SFP Handle

Figure 58. Positioning the Handle in the Upright Position

99