Chapter 7: Cabling the Stacking Ports
Cabling Switches with AT-StackXS/1.0 Transceivers
To cable the switches of the stack with
Warning
A transceiver can be damaged by static electricity. Be sure to observe all standard electrostatic discharge (ESD) precautions, such as wearing an antistatic wrist strap, to avoid damaging the device.
1.Remove the dust plug from the S1 slot on the top switch of the stack, as shown in Figure 50.
SFP+
/2 | 7 |
26 |
| CON |
|
|
|
| |
S2/2 |
| SO | LE |
8 |
|
2681
Figure 50. Removing the Dust Plug from the S1 Slot
2.Remove the transceiver from its shipping container and store the packaging material in a safe location.
92
