Allied Telesis AT-PWR06, AT-FAN06 Optional QSFP+ Transceivers, Management Software and Interfaces

Chapter 1: Overview

Optional QSFP+ Transceivers

The following QSFP+ transceivers direct attach cable assemblies have been approved by Allied Telesis and may be installed in the AT-DC2552XS chassis:

Note

The QSFP+ transceivers and direct attach cable assemblies are sold separately from the AT-DC2552XS L2 Data Center Switch. Contact your local Allied Telesis representative for more information.

AT-QSFPSR (40GBASE-SR4 (MPO))

QSFP+ Direct Attach Cables

-AT-QSFP1CU (QSFP + Direct Attach Cable (1m))

-AT-QSFP3CU (QSFP + Direct Attach Cable (3m))

Fiber-Optic Cable for AT-QSFPSR

-ET3-MPO12-1 (1m)

-ET3-MPO12-5 (5m)

Management Software and Interfaces

Here are the management software and the management interfaces:

AlliedWare Plus Management Software

Command line interface

SNMP V1, V2 and V3

Note

Refer to the AT-DC2552XS Management Software Command Line Interface User’s Guide for information concerning specific commands.

Management Methods

Here are the methods for managing the switches:

Local management through the Console port

Telnet client on a network or NET MGMT port

Secure Shell with telnet client on a network (SSH) port

SNMPv1, v2c, and v3 on a network or NET MGMT port

18