Manuals / Allied Telesis / Computer Equipment / Switch

Allied Telesis AT-DC2552XS, AT-FAN06 manual AT-PWR06 Power Supply Module

Models: AT-FAN06 AT-DC2552XS AT-PWR06

1 84

Download 84 pages 30.01 Kb

Page 30

AT-PWR06 Power Supply Module

Chapter 1: Overview

AT-PWR06 Power Supply Module

The AT-DC2552XS L2 Data Center Switch is powered by one AT-PWR06 power supply module. A second AT-PWR06 power supply module may be installed for redundancy. The power supply module has an AC connector on the power supply module panel and is installed by the user in slot PS1 or slot PS2. The location of these slots is shown in Figure 2 on page 20.

When two power supplies are installed and operating, only one power supply is active at a time. The second power supply operates in a redundant state and is automatically activated by the switch if the active power supply loses power or fails. The change over is instantaneous and has no effect on the Ethernet data being passed through the chassis.

Warning

Power cord is used as a disconnection device. To de-energize equipment, disconnect the power cord.  E3

Warning

This unit might have more than one power cord. To reduce the risk of electric shock, disconnect all power cords before servicing the unit.  E30

Refer to “Power Specifications” on page 80 for the input power specifications.

A view of the AT-PWR06 power supply module is shown in Figure 9.

Captive	AC Power	Intake
Screws	LED	Air Vents

PowerHandle

Connector

Figure 9. AT-PWR06 Power Supply Module

30

Image 30

Allied Telesis AT-DC2552XS, AT-FAN06 manual AT-PWR06 Power Supply Module

Contents

AT-DC2552XS Installation GuideL2 Data Center Switch 613-001760 Rev. ACopyright 2013 Allied Telesis, Inc Electrical Safety and Emissions Standards Translated Safety Statements Contents Connecting the Console Port ContentsChapter 6 Managing the Switch NET MGMT Cable InstallationFigures Figures Tables Tables  “Document Conventions” on page PrefaceThis preface contains the following sections  “Contacting Allied Telesis” on pageDocument Conventions This document uses the following conventionsNotes provide additional information Contacting Allied Telesis Stack Installation Guide for AT-2552XS L2 Data Center SwitchPreface Overview ChapterPorts AT-DC2552XS FeaturesFunctions System CapacityInstallation Options Power Supply/Fan ModulesOptional SFP+ Transceivers Optional QSFP+ Transceivers Management Software and InterfacesManagement Methods AT-DC2552XS Physical Description AT-DC2552XS Front PanelNET MGMT Port LEDs AT-DC2552XS Rear Panel4 QSFP+ Slots Ports 49 Console Port Power/Fault LED NET MGMT PortKeep the exhaust air vents clear of any obstructions to insure proper cooling of the switch components 100Mbps Cable Type10Mbps 1000MbpsLEDs StateDescription State DescriptionLocation StateDescription State NET MGMT LEDLocation DescriptionDescription LocationState bottom LEDState Power SupplyLocation DescriptionConsole Port AT-PWR06 Power Supply Module The components of the AT-PWR06 power supply module refer to Figure 9 on page 30 are as follows AT-FAN06 Fan Module  “Reviewing Safety Precautions” on page Beginning the Installation “Installation Overview” on page  “Planning the Installation” on pageInstallation Overview ProcedureStep Reviewing Safety Precautions All Countries Install product in accordance with local and National  E30  E37 Planning the Installation Unpacking the Switch AT-DC2552XS SwitchAT-PWR06 Power Supply AT-FAN06 Fan Module Installing the Switch and Modules ChapterInstalling the Switch on a Desktop Installing the Switch in an Equipment Rack This procedure requires the following items Figure 17. Mounting the Switch in an Equipment Rack Stack Installation Guide for AT-2552XS L2 Data Center SwitchInstalling and Replacing AT-PWR06 Power Supply Module Installing Power Supply ModuleFigure 19. Insert AT-PWR06 Module Into Chassis Replacing Power Supply Module Installing Power Supply Blank Cover Installing and Replacing AT-FAN06 Fan Module Installing Fan ModuleFigure 23. Tighten AT-FAN06 Captive Screws Replacing Fan Module Installing the SFP+ and QSFP+ Transceivers and Cables ChapterSFP+ Installing SFP+ Transceivers and CablesGeneral Guidelines Cable UsedInstalling SFP+ Transceiver Figure 26. Installing a SFP+ Transceiver Installing a SFP+ Direct Attach Cables Figure 30. Installing a SFP+ Direct Attach Cable Port Installing QSFP+ Transceivers and CablesInstalling a QSFP+ Transceiver Cable UsedFigure 31. Removing QSFP+ Slot Dust Cover Installing a QSFP+ MTHTP Cable Figure 35. Removing QSFP+ Slot Dust Cover  “Powering On the Switch” on page  “Turn Off the switch” on page Powering the SwitchThe procedures in this chapter are listed here ChapterPowering On the Switch Stack Installation Guide for AT-2552XS L2 Data Center Switch Turn Off the switch Chapter 5 Powering the SwitchChapter Managing the SwitchThis chapter contains the following procedures to manage the switch  Local management via Telnet clientConnecting the Console Port Local Management Stop bits  Flow control None NET MGMT Cable Installation Remote Network ManagementFigure 38. Connecting the Twisted Pair Cable into the NET MGMT port Chapter 6 Managing the Switch Troubleshooting Chapter Verify that the correct type of fiber optic cabling is being used Stack Installation Guide for AT-2552XS L2 Data Center Switch Chapter 7 Troubleshooting Environmental Specifications Technical SpecificationsPhysical Specifications Dimensions H x W x DCertifications Power SpecificationsAT-PWR06 Input Specifications Quality and ReliabilityMDI Signal MDI-X SignalRJ-45 Twisted Pair Port Pinouts Pinout PairStack Installation Guide for AT-2552XS L2 Data Center Switch Appendix A Technical Specifications