AltiGen comm AltiServ TM 4.5 manual Feature Diala Description Feature Status #22

Other Features

Feature	Diala	Description
Feature Status	#22	Retrieves an announcement about currently
Check		activated telephone features. In addition, the
		dial tone changes when the following features
		are activated: Do Not Disturb, Call Forward-
		ing, Remote Call Forwarding, Hands-Free
		Mode, Dial Tone Mute Mode, Outside Call
		Blocking (Operator only) and Operator Off-
		line (Operator only).
Station Speed Dial	#25 <nn>	Program a station speed dial phone number
Setup	<phone	assigned to a 2-digit dialing number between
	num> #	00 and 19. The phone number can be up to 20
		digits, and must include all necessary digits
		such as outside line access digit, 1 for out of
		area numbers and the area code. When you
		have finished, press #.
		Hang up when done, or you can continue to set
		up other speed dial numbers by pressing #
		again.
Overhead Paging	#44	If available on your system, connects to the
		overhead broadcast device. Speak into the
		handset and hang up when finished.
Overhead Paging	#45	If available on your system, directs a call to a
by Trunk		particular trunk with a paging ID broadcast.
		Allows broadcasting through a trunk without
		checking call progress.
Feature Tips	#55	Plays helpful tips and reminders for optimal
		use of AltiServ. There are eleven tips total and
		a different one is played each time you access
		Feature Tips. See “Feature Tips” on page 13
		for more information.
Silent System Call	#73	Disable the system from announcing the
Park		“location” of a call when using the System
		Call Park feature. See “System Call Park and
		Silent System Call Park” on page 7.

a <nn> = 2-digit num; <phone number> = extension or complete phone number, including trunk or route access code

2These features require a Triton Resource Board and system settings that allow monitoring and barge-in.

22AltiServ User Guide