AMCC 9590SE-4ME manual show alarms reverse, show diag, show rebuild

Chapter 2. CLI Syntax Reference

show alarms [reverse]

This command shows the alarms or AEN messages of all controllers in the system. The default is to display the most recent message first. The reverse attribute displays the most recent message last.

show diag

This command shows the diagnostic information of all controllers in the system.

show rebuild

This command displays all rebuild schedules for the 9000 controllers in the system.

The rebuild rate is also applicable for initializing, migrating, and recovery background tasks.

Example:

//localhost> show rebuild

Rebuild Schedule for Controller /c0

========================================================

Slot Day Hour Duration Status

--------------------------------------------------------

1	Sun	12:00am	24	hr(s)	disabled
2	Mon	12:00am	24	hr(s)	disabled
3	Tue	12:00am	24	hr(s)	disabled
4	Wed	12:00am	24	hr(s)	disabled
5	Thu	12:00am	24	hr(s)	disabled
6	Fri	12:00am	24	hr(s)	disabled
7	Sat	12:00am	24	hr(s)	disabled

For additional information about rebuild schedules, see “/cx add rebuild=ddd:hh:duration” on page 45, and see the discussion of background tasks and schedules in 3ware Serial ATA RAID Controller User Guide.

22 3ware Serial ATA RAID Controller CLI Guide for the Power Mac G5