AMCC 9590SE-4ME manual help show, help flush, localhost help

Help Commands

help

This help command provide a table of contents, providing help with the overall navigation of the CLI commands. Typical output looks like the following.

//localhost> help

Copyright(c) 2004, 2005 Applied Micro Circuits Corporation (AMCC). All rights reserved.

AMCC/3ware CLI (version 2.x)

Commands Description

--------------------------------------------------------------

show	Displays information about controller(s), unit(s) and port(s).
flush	Flush write cache data to units in the system.
rescan	Rescan all empty ports for new unit(s) and disk(s).
update	Update controller firmware from an image file
/cx	Controller specific commands.
/cx/ux	Unit specific commands.
/cx/px	Port specific commands.	(9000 only)
/cx/bbu	BBU specific commands.
/ex	Enclosure specific commands.	(9550SX and 9590SE only)
/ex/slotx	Slot specific commands.
/ex/fanx	Fan specific commands.
/ex/tempx	Enclosure Temperature Sensor specific commands.

Certain commands are qualified with constraints of controller type/model support. Please consult the tw_cli documentation for explanation of the controller-qualifiers.

The controller-qualifiers of the Enclosure commands (/ex) also apply to

Enclosure Element specific commands (e.g., /ex/elementx).

Type help <command> to get more details about a particular command. For more detail information see tw_cli's documentation.

help show

This command provides specific show-related help, illustrating various ways to use the show command. It provides reports on Controllers, Units and Drives. See the section “Shell Object Commands” on page 19 for more information.

help flush

This command provides specific flush-related help, illustrating various ways to use the flush command. See the section “Shell Object Commands” on page 19 for more information.

www.3ware.com 85