Chapter 2. CLI Syntax Reference
having to specify it as a spare. It also means that if you accidentally disconnect a drive (causing the controller to see it as a failed drive) and then reconnect it, the controller will automatically try to use it again.
If the policy is off, spares are the only candidates for rebuild operations.
Example:
//localhost> /c0 set autorebuild=enable
Setting
/cx start mediascan
This command applies only to 7000/8000 controllers. For 9000 series controllers, use the verify command.
This command provides media scrubbing for validating the functionality of a disk, including bad block detection, remapping, and so forth. The command starts a media scan operation on the specified controller /cx.
/cx stop mediascan
This command applies only to 7000/8000 controllers.
This commands stops a media scan operation on the specified controller /cx. (Media scans are started using /cx start mediascan.)
52 | 3ware Serial ATA RAID Controller CLI Guide for the Power Mac G5 |
