Help Commands

Help Commands

The Help commands provides brief on-line help.

You can get overview help by typing Help at the top-level prompt. This displays a brief definition of commands in both the new syntax and the legacy syntax. (For an example, see the discussion of the command “help” on page 85.)

You can also get help with specific commands, by entering help before an object name, or by typing a question mark (?) at the point in a command where you are uncertain what the attributes are.

Help with specific commands

If you enter the help command at the top level, you are considered to be in the Shell Object, and the help command will provide help on the Shell commands focus, show, flush, rescan, and commit. Using the help command on objects (such as /cx, /cx/ux, /cx/px, /cx/bbu, /ex, /ex/slotx, /ex/fanx, and /ex/tempx), displays all possible sub-commands associated with the object.

For example: help on the controller object /cx, will display all the sub- commands associated with the controller /cx, like this:

//localhost> help /cx

 

/cx show

attribute [attribute ...]

where attribute is:

/cx show

achipallunitstatusautocarveautorebuild(9550SX and 9590SE only)bioscarvesize(9000 series)ctlbus(9550SX and 9590SE only)driverdrivestatusexportjbodfirmwarememory modelmonitornumdrivesnumportsnumunitspcbpchip serialspinupstaggerunitstatusondegrade(9000S only)

/cx show all where all means attributes and configurations.

/cx show diag

 

 

/cx show alarms [reverse]

(9000

only)

/cx show rebuild

/cx

show

verify

(9000

only)

/cx

show

selftest

(9000

only)

/cx add type=<RaidType> disk=<p:-p..> [stripe=<Stripe>] [noscan] [nocache][group=<3456>] [autoverify] [ignoreECC] [name=string (9000 only)] [storsave=<protectbalance perform[quiet]>(9550SX and 9590SE only)] RaidType={raid0,

raid1,

raid5, raid10, raid50, single, spare, JBOD

(7000/8000 only)}

(9000

only)

/cx add

rebuild=ddd:hh:duration

/cx add

verify=ddd:hh:duration

(9000

only)

/cx add

selftest=ddd:hh

(9000

only)

/cx del

rebuild=slot_id

(9000

only)

/cx del

verify=slot_id

(9000

only)

www.3ware.com

83

Page 89
Image 89
AMCC 9590SE-4ME manual Help Commands, Help with specific commands