Shell Object Commands
Port Object Commands. Port object commands provide information and perform actions related to a drive on a specific port. For example, you use port object commands for such tasks as seeing the status, model, or serial number of the drive. For details, see “Port Object Commands” on page 69.
BBU Object Commands. BBU object commands provide information and perform actions related to a Battery Backup Unit on a specific controller. For details, see “BBU Object Commands” on page 74.
Enclosure Object Commands. Enclosure object commands provide information and perform actions related to a particular enclosure. For example, you can use enclosure object commands to see information about an enclosure and its elements (slots, fan, and temperature sensor elements).
Help Commands. Help commands allow you to display help information for all commands and attributes. For details, see “Help Commands” on page 83.
Shell Object Commands
Shell object commands are either applicable to all the controllers in the system (such as show, rescan, flush, commit), or redirect the focused object.
Syntax
focus object
show [attribute [modifier]] ver
alarms [reverse] diag
rebuild verify selftest
rescan flush commit
update fw=filename_with_path [force]
focus Object
The focus command is active in interactive mode only and is provided to reduce typing.
The focus command will set the specified object in focus and change the prompt to reflect this. This allows you to enter a command that applies to the focus, instead of having to type the entire object name each time.
For example, where normally you might type:
//hostname/c0/u0 show
www.3ware.com | 19 |
