AMCC 9590SE-4ME manual cx/ux show attribute attribute, cx/ux show status

Chapter 2. CLI Syntax Reference

One application of the /cx/ux show command is to see which sub-unit of a degraded unit has caused the unit to degrade and which disk within that sub- unit is the source of degradation. Another application is to see the source and destination units during a migration.

Example:

//localhost> /c0/u1 show			%Cmpl	Port	Stripe	Size(GB)	Blocks
Unit	UnitType	Status
----------------------------------------------------------------------
u1	RAID-0	OK	-	-	64K	3576.06	7499550720
u1-0	DISK	OK	-	p0	-	298.01	624962560
u1-1	DISK	OK	-	p1	-	298.01	624962560
u1-2	DISK	OK	-	p2	-	298.01	624962560
u1-3	DISK	OK	-	p3	-	298.01	624962560
u1-4	DISK	OK	-	p4	-	298.01	624962560
u1-5	DISK	OK	-	p5	-	298.01	624962560
u1-6	DISK	OK	-	p6	-	298.01	624962560
u1-7	DISK	OK	-	p7	-	298.01	624962560
u1-8	DISK	OK	-	p8	-	298.01	624962560
u1-9	DISK	OK	-	p9	-	298.01	624962560
u1-10	DISK	OK	-	p10	-	298.01	624962560
u1-11	DISK	OK	-	p11	-	298.01	624962560
u1/v0	Volume	-	-	-	-	2047.00	4292870144
u1/v1	Volume	-	-	-	-	1529.06	3206680576

/cx/ux show attribute [attribute ...]

This command shows the current setting of the specified attributes. One or many attributes can be requested. Specifying an invalid attribute will terminate the loop. Possible attributes are: initializestatus, name (9000 series), qpolicy (9550SX and 9590SE only), rebuildstatus, serial (9000 series), status, storsave (9550SX and 9590SE only), verifystatus, volumes (9000 series), autoverify (9000 series), cache, ignoreECC (9000 series), and identify (9550SX and 9590SE only).

/cx/ux show status

This command reports the status of the specified unit.

Possible statuses include: OK, VERIFYING, VERIFY-PAUSED, INITIALIZING, INIT-PAUSED, REBUILDING, REBUILD-PAUSED, DEGRADED, MIGRATING, MIGRATE-PAUSED, RECOVERY, INOPERABLE, and UNKNOWN. (Definitions of the unit statuses are available in the 3ware Serial ATA RAID Controller User Guide.)

Example:

//localhost> /c0/u0 show status /c0/u5 status = OK

54 3ware Serial ATA RAID Controller CLI Guide for the Power Mac G5